首页 > 最新文献
paperpass

The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011最新文献

英文 中文
A highly linear CMOS temperature sensor 高线性CMOS温度传感器
C. Lin, Sheng-Feng Lin
In this work, we proposed a linear CMOS temperature-to-current converter as a temperature sensor, which especially benefit on enhancing the accuracy of thermal monitoring. The proposed design achieves highly linear relationship between temperature and current by annulling the most critical nonlinear square terms of it. Through utilizing a compensation scheme among two current sources driven in saturation region with different bias voltages, the nonlinear effect originated from the temperature dependence of both mobility degradation and threshold voltage drift is cancelled. The experiment results demonstrate competitive performance. The maximum temperature error and average power consumption of temperature sensor are merely ±0.022°C and 137.6µW respectively while the die area is about 27.1µm*18.3µm under the implementation of TSMC 0.35µm CMOS process with 3.3V power supply.
在这项工作中,我们提出了一种线性CMOS温度-电流转换器作为温度传感器,特别有利于提高热监测的准确性。提出的设计通过取消温度和电流最关键的非线性平方项来实现温度和电流之间的高度线性关系。通过在不同偏置电压的饱和区驱动两个电流源之间的补偿方案,消除了迁移率退化和阈值电压漂移的温度依赖所引起的非线性效应。实验结果表明,该系统具有一定的竞争力。采用台积电0.35µm CMOS工艺,在3.3V电源下,温度传感器的最大温度误差仅为±0.022°C,平均功耗仅为137.6µW,芯片面积约为27.1µm*18.3µm。
{"title":"A highly linear CMOS temperature sensor","authors":"C. Lin, Sheng-Feng Lin","doi":"10.1109/ECTICON.2011.5947774","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947774","url":null,"abstract":"In this work, we proposed a linear CMOS temperature-to-current converter as a temperature sensor, which especially benefit on enhancing the accuracy of thermal monitoring. The proposed design achieves highly linear relationship between temperature and current by annulling the most critical nonlinear square terms of it. Through utilizing a compensation scheme among two current sources driven in saturation region with different bias voltages, the nonlinear effect originated from the temperature dependence of both mobility degradation and threshold voltage drift is cancelled. The experiment results demonstrate competitive performance. The maximum temperature error and average power consumption of temperature sensor are merely ±0.022°C and 137.6µW respectively while the die area is about 27.1µm*18.3µm under the implementation of TSMC 0.35µm CMOS process with 3.3V power supply.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"50 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134524050","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Selective image smoothing and feature enhancement using modified shock filters 选择性图像平滑和特征增强使用改进的冲击滤波器
A. Bini, M. S. Bhat
Shock filters are widely used for image enhancement and deblurring. These filters make use of nonlinear hyperbolic Partial Differential Equations (PDEs) in order to sharpen the edges. However, in many practical cases images are corrupted by noise and other kind of degradations. Convensional shock filters are not suitable in such cases as they enhance the noise present in the image. Hence, the idea of combining shock filters with diffusion yield good results. In this paper we propose a modified “diffusion coupled shock filter.” The proposed method makes use of an ‘adaptive diffusion term’ which limits the extent of smoothing on important edges making them more sharper. The experimental results demonstrate the efficiency of the proposed method to control diffusion and to make the reconstruction more reliable.
冲击滤波器广泛用于图像增强和去模糊。这些滤波器利用非线性双曲偏微分方程(PDEs)来锐化边缘。然而,在许多实际情况下,图像被噪声和其他类型的退化所破坏。传统的冲击滤波器不适合在这种情况下,因为它们增强了图像中存在的噪声。因此,将激波滤波器与扩散相结合的想法产生了良好的效果。本文提出了一种改进的“扩散耦合激波滤波器”。所提出的方法使用了一个“自适应扩散项”,它限制了重要边缘的平滑程度,使它们更加锐利。实验结果表明,该方法有效地控制了扩散,使重建更加可靠。
{"title":"Selective image smoothing and feature enhancement using modified shock filters","authors":"A. Bini, M. S. Bhat","doi":"10.1109/ECTICON.2011.5948009","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5948009","url":null,"abstract":"Shock filters are widely used for image enhancement and deblurring. These filters make use of nonlinear hyperbolic Partial Differential Equations (PDEs) in order to sharpen the edges. However, in many practical cases images are corrupted by noise and other kind of degradations. Convensional shock filters are not suitable in such cases as they enhance the noise present in the image. Hence, the idea of combining shock filters with diffusion yield good results. In this paper we propose a modified “diffusion coupled shock filter.” The proposed method makes use of an ‘adaptive diffusion term’ which limits the extent of smoothing on important edges making them more sharper. The experimental results demonstrate the efficiency of the proposed method to control diffusion and to make the reconstruction more reliable.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133376461","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Reliability and economic analysis of a stand-alone PV system to electrify three Islands in Taiwan 台湾三岛独立光伏发电系统的可靠性与经济性分析
J. Ling, A. Khuong
Photovoltaic-battery system is a sustainable option for isolated electrical power generation at locations receiving abundant sunshine. This paper presents an optimization method for calculating the optimal capacity planning of stand-alone photovoltaic (SPV) system installed at three Islands of Taiwan with high reliability and minimum cost. The Genetic Algorithm (GA) for investigating the optimal capacity planning of SPV system was conducted. The total cost of the initial cost, installed cost, replacement cost, operation and maintenance cost was used to define the objective function. The capacity allocation problem based on GA is to find global optimal solution within a satisfied computational time. Different degrees of the system reliability are investigated to achieve the long-term planning requirement.
光伏电池系统是在日照充足的地区进行隔离发电的可持续选择。本文提出了一种计算台湾三岛高可靠性、低成本单机光伏系统最优容量规划的优化方法。采用遗传算法研究了SPV系统的最优容量规划问题。用初始成本、安装成本、重置成本、运行维护成本的总成本来定义目标函数。基于遗传算法的容量分配问题是在满足的计算时间内找到全局最优解。研究了不同程度的系统可靠性,以达到长期规划的要求。
{"title":"Reliability and economic analysis of a stand-alone PV system to electrify three Islands in Taiwan","authors":"J. Ling, A. Khuong","doi":"10.1109/ECTICON.2011.5947961","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947961","url":null,"abstract":"Photovoltaic-battery system is a sustainable option for isolated electrical power generation at locations receiving abundant sunshine. This paper presents an optimization method for calculating the optimal capacity planning of stand-alone photovoltaic (SPV) system installed at three Islands of Taiwan with high reliability and minimum cost. The Genetic Algorithm (GA) for investigating the optimal capacity planning of SPV system was conducted. The total cost of the initial cost, installed cost, replacement cost, operation and maintenance cost was used to define the objective function. The capacity allocation problem based on GA is to find global optimal solution within a satisfied computational time. Different degrees of the system reliability are investigated to achieve the long-term planning requirement.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"405 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124318012","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Study of maximum power conversion of a switched-reluctance generator 开关磁阻发电机最大功率转换研究
P. Kerdtuad, S. Kittiratsatcha
This paper presents the study of maximum power conversion of a Switched Reluctance Generator (SRG). The SRG is operated in single pulse mode where the rotor speed is above base speed. The turn-on and turn-off angle are varied to study the shape of the phase current which is directly related to the power conversion. A 4 Phase, 2kW, 8/6 SRG is used to collect the experimental results. The converter is the conventional 2-switched per phase and a TMS320F2812 Digital Signal Processing (DSP) is a main controller.
本文研究了开关磁阻发电机(SRG)的最大功率转换。SRG在单脉冲模式下运行,转子转速高于基本转速。通过改变导通角和关断角来研究与功率转换直接相关的相电流形状。采用4相,2kW, 8/6 SRG采集实验结果。转换器是传统的每相位2开关,TMS320F2812数字信号处理(DSP)是主控制器。
{"title":"Study of maximum power conversion of a switched-reluctance generator","authors":"P. Kerdtuad, S. Kittiratsatcha","doi":"10.1109/ECTICON.2011.5947919","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947919","url":null,"abstract":"This paper presents the study of maximum power conversion of a Switched Reluctance Generator (SRG). The SRG is operated in single pulse mode where the rotor speed is above base speed. The turn-on and turn-off angle are varied to study the shape of the phase current which is directly related to the power conversion. A 4 Phase, 2kW, 8/6 SRG is used to collect the experimental results. The converter is the conventional 2-switched per phase and a TMS320F2812 Digital Signal Processing (DSP) is a main controller.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"105 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129079141","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 10
Comparison of multivariable series LSQ and differential equation based techniques for fault location on transmission lines 多变量串联LSQ与基于微分方程的输电线路故障定位技术比较
P. Bedekar, S. Bhide
This paper presents the comparison of differential equation (DE) based algorithm and multi-variable series least squares (MVS-LSQ) based algorithm used for location of fault on transmission lines. A single pi section model of transmission line has been used to generate the samples of voltage and current at relay location. These samples have been utilized in the said algorithms to locate the fault i.e. to find the resistance (R) and inductance (L) between relay location and fault point. Samples of voltage and current were obtained using simulation in PSCAD. Programs have been developed in MATLAB, for obtaining the value of R and L using DE based algorithm and MVS-LSQ based algorithm.
对基于微分方程(DE)的输电线路故障定位算法和基于多变量级数最小二乘(MVS-LSQ)的输电线路故障定位算法进行了比较。采用传输线的单pi截面模型,生成了继电器位置的电压和电流样本。这些样本在上述算法中被用来定位故障,即找到继电器位置和故障点之间的电阻(R)和电感(L)。在PSCAD中进行仿真,得到了电压和电流的样本。在MATLAB中编写了程序,分别使用基于DE的算法和基于MVS-LSQ的算法获得R和L的值。
{"title":"Comparison of multivariable series LSQ and differential equation based techniques for fault location on transmission lines","authors":"P. Bedekar, S. Bhide","doi":"10.1109/ECTICON.2011.5947937","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947937","url":null,"abstract":"This paper presents the comparison of differential equation (DE) based algorithm and multi-variable series least squares (MVS-LSQ) based algorithm used for location of fault on transmission lines. A single pi section model of transmission line has been used to generate the samples of voltage and current at relay location. These samples have been utilized in the said algorithms to locate the fault i.e. to find the resistance (R) and inductance (L) between relay location and fault point. Samples of voltage and current were obtained using simulation in PSCAD. Programs have been developed in MATLAB, for obtaining the value of R and L using DE based algorithm and MVS-LSQ based algorithm.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"108 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132113107","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
A novel two-step TOA estimation for transmitted-reference receiver in UWB systems 超宽带系统中一种新的发射参考接收机的两步TOA估计
Patcharanee Sangbumrung, Wilaiporn Lee
In this paper, we proposed a novel two-step type on time of arrival (TOA) estimation for transmitted-reference (TR) transceiver for impulse radio Ultra-wideband (IR-UWB) systems. Two-step method includes two parts: initial signal acquisition (ISA) and finite timing estimation (FTE). We propose the threshold selection method at ISA section. This method give the short time and can be applied in TR transceiver technique. At FTE part, we use the maximum energy selection (MES) for finding TOA estimation value. The simulation results show that the proposed method out-performs than the conventional technique when we use TR transceiver.
本文提出了一种用于脉冲无线电超宽带(IR-UWB)系统的发射参考(TR)收发器的两步到达时间(TOA)估计方法。两步法包括初始信号采集(ISA)和有限定时估计(FTE)两部分。我们在ISA部分提出了阈值选择方法。该方法时间短,可应用于TR收发技术。在FTE部分,我们使用最大能量选择(MES)来寻找TOA估计值。仿真结果表明,在使用TR收发器时,该方法的性能优于传统方法。
{"title":"A novel two-step TOA estimation for transmitted-reference receiver in UWB systems","authors":"Patcharanee Sangbumrung, Wilaiporn Lee","doi":"10.1109/ECTICON.2011.5947854","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947854","url":null,"abstract":"In this paper, we proposed a novel two-step type on time of arrival (TOA) estimation for transmitted-reference (TR) transceiver for impulse radio Ultra-wideband (IR-UWB) systems. Two-step method includes two parts: initial signal acquisition (ISA) and finite timing estimation (FTE). We propose the threshold selection method at ISA section. This method give the short time and can be applied in TR transceiver technique. At FTE part, we use the maximum energy selection (MES) for finding TOA estimation value. The simulation results show that the proposed method out-performs than the conventional technique when we use TR transceiver.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"875 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133728889","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Robust digital control for boost DC-DC converter 升压DC-DC变换器的鲁棒数字控制
Y. Ohta, K. Higuchi, T. Kajikawa
If the duty ratio, load resistance and input voltage in boost DC-DC converter are changed, the dynamic characteristics is varied greatly, that is, boost DC-DC converter has non-linear characteristics. In many applications of DC-DC converters, the load cannot be specified in advance, and it will be changed suddenly from no load to full load. In the boost DC-DC converter system used a conventional single controller cannot be adapted to change dynamics and it occurs large output voltage variation. In this paper, the robust digital controller for suppress the change of step response characteristics and variation of output voltage in the load sudden changes is proposed. Experimental studies using micro-processor for controller demonstrate that this type of digital controller is effective to suppress variations.
如果改变升压DC-DC变换器的占空比、负载电阻和输入电压,则其动态特性变化很大,即升压DC-DC变换器具有非线性特性。在DC-DC变换器的许多应用中,不能预先规定负载,会突然从空载变为满载。在升压DC-DC变换器系统中,传统的单控制器不能适应动态变化,输出电压变化较大。提出了一种鲁棒数字控制器,用于抑制负载突变时阶跃响应特性的变化和输出电压的变化。用微处理器作为控制器的实验研究表明,这种数字控制器能够有效地抑制变化。
{"title":"Robust digital control for boost DC-DC converter","authors":"Y. Ohta, K. Higuchi, T. Kajikawa","doi":"10.1109/ECTICON.2011.5947891","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947891","url":null,"abstract":"If the duty ratio, load resistance and input voltage in boost DC-DC converter are changed, the dynamic characteristics is varied greatly, that is, boost DC-DC converter has non-linear characteristics. In many applications of DC-DC converters, the load cannot be specified in advance, and it will be changed suddenly from no load to full load. In the boost DC-DC converter system used a conventional single controller cannot be adapted to change dynamics and it occurs large output voltage variation. In this paper, the robust digital controller for suppress the change of step response characteristics and variation of output voltage in the load sudden changes is proposed. Experimental studies using micro-processor for controller demonstrate that this type of digital controller is effective to suppress variations.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"32 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131825674","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 6
Cardiac auscultation analysis system with Neural Network and SVM technique 基于神经网络和支持向量机技术的心脏听诊分析系统
P. Phatiwuttipat, Waree Kongprawechon, K. Tungpimolrut, Sumeth Yuenyong
The system of this study is aimed to support doctors with an analyzed Cardiac auscultation. Extract the information from the heart sound signal obtained from stethoscope mobbed on the robot arm control is used in the further signal processing. Due to time consuming and accuracy, Support Vector Machine is introduced to replace Neural Network for better performance.With the proposed technique, the high classification performances were achieved 96.4% accuaracy for classifying normal and abnormal heart sound while shortening the training time almost 300%. As the result, multi-classifier was introduced for advance development. This paper shows the comparison work between Neural Network and Support Vector Machine.
本研究的系统旨在通过分析心脏听诊来支持医生。从机器人手臂控制上的听诊器获取的心音信号中提取信息,用于进一步的信号处理。由于耗时和准确性的问题,引入支持向量机来代替神经网络以获得更好的性能。采用该方法对正常和异常心音进行分类,准确率达到96.4%,训练时间缩短近300%。因此,为了进一步发展,引入了多分类器。本文给出了神经网络与支持向量机的比较工作。
{"title":"Cardiac auscultation analysis system with Neural Network and SVM technique","authors":"P. Phatiwuttipat, Waree Kongprawechon, K. Tungpimolrut, Sumeth Yuenyong","doi":"10.1109/ECTICON.2011.5948018","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5948018","url":null,"abstract":"The system of this study is aimed to support doctors with an analyzed Cardiac auscultation. Extract the information from the heart sound signal obtained from stethoscope mobbed on the robot arm control is used in the further signal processing. Due to time consuming and accuracy, Support Vector Machine is introduced to replace Neural Network for better performance.With the proposed technique, the high classification performances were achieved 96.4% accuaracy for classifying normal and abnormal heart sound while shortening the training time almost 300%. As the result, multi-classifier was introduced for advance development. This paper shows the comparison work between Neural Network and Support Vector Machine.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132147563","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 13
Online fatigue detection of a SMA-based control valve using CUSUM algorithm 基于sma的控制阀疲劳在线检测的CUSUM算法
P. Passaranon, S. Wongsa, D. Koolpiruck, A. Khantachawana
This paper describes a functional fatigue detection system for nonlinear SMA-based control valve. Any drift from the normal behavior of the valve is revealed using a model-based residual generator by means of a nonlinear auto-regressive with eXogenous input (NARX) model. Based on the optimisation property of cumulative sum (CUSUM), an online system for detecting changes in statistical properties of residuals due to fatigue of the valve is developed. The experimental results suggest that the variance of one step ahead (OSA) error and model predicted error (MPE) is a good indicator of fatigue states of the valve.
介绍了一种基于sma的非线性控制阀功能疲劳检测系统。使用基于模型的残差发生器,通过具有外源输入的非线性自回归(NARX)模型来揭示阀门正常行为的任何漂移。基于累积和优化特性(CUSUM),开发了一种在线检测气门疲劳残差统计特性变化的系统。实验结果表明,一步前误差(OSA)与模型预测误差(MPE)的方差可以很好地反映阀门的疲劳状态。
{"title":"Online fatigue detection of a SMA-based control valve using CUSUM algorithm","authors":"P. Passaranon, S. Wongsa, D. Koolpiruck, A. Khantachawana","doi":"10.1109/ECTICON.2011.5947895","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947895","url":null,"abstract":"This paper describes a functional fatigue detection system for nonlinear SMA-based control valve. Any drift from the normal behavior of the valve is revealed using a model-based residual generator by means of a nonlinear auto-regressive with eXogenous input (NARX) model. Based on the optimisation property of cumulative sum (CUSUM), an online system for detecting changes in statistical properties of residuals due to fatigue of the valve is developed. The experimental results suggest that the variance of one step ahead (OSA) error and model predicted error (MPE) is a good indicator of fatigue states of the valve.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132697056","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
CPW-fed slot antenna with fractal tuning stub for wideband circular polarization 用于宽带圆极化的分形调谐短节cpw馈电槽天线
Jeera Gosalvitr, C. Mahatthanajatuphat, P. Akkaraekthalin, S. Chaimool
Based on the use of the fractal tuning stub and slot radiator, a wideband circularly polarized coplanar waveguide (CPW)-fed slot antenna with fractal tuning stub is presented. The fractal tuning stub has been designed to enhance widely the impedance bandwidth. Moreover, in order to achieve the extended axial ratio bandwidth, the slot radiator is etched and verified on the upper slot. The proposed antenna attains an overlapped bandwidth (axial ration ≤ 3 dB and return loss ≤ 10 dB) of 45% (2.25–3.57 GHz) in measurement.
基于分形调谐存根和缝隙辐射体,提出了一种带分形调谐存根的宽带圆极化共面波导馈电缝隙天线。设计了分形调谐短段,大大提高了阻抗带宽。此外,为了实现扩展轴比带宽,在上槽上蚀刻并验证了槽散热器。经测量,天线的重叠带宽(轴向比≤3db,回波损耗≤10db)为45% (2.25-3.57 GHz)。
{"title":"CPW-fed slot antenna with fractal tuning stub for wideband circular polarization","authors":"Jeera Gosalvitr, C. Mahatthanajatuphat, P. Akkaraekthalin, S. Chaimool","doi":"10.1109/ECTICON.2011.5947810","DOIUrl":"https://doi.org/10.1109/ECTICON.2011.5947810","url":null,"abstract":"Based on the use of the fractal tuning stub and slot radiator, a wideband circularly polarized coplanar waveguide (CPW)-fed slot antenna with fractal tuning stub is presented. The fractal tuning stub has been designed to enhance widely the impedance bandwidth. Moreover, in order to achieve the extended axial ratio bandwidth, the slot radiator is etched and verified on the upper slot. The proposed antenna attains an overlapped bandwidth (axial ration ≤ 3 dB and return loss ≤ 10 dB) of 45% (2.25–3.57 GHz) in measurement.","PeriodicalId":123701,"journal":{"name":"The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011","volume":"635 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132937262","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 6
期刊
The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011
全部 Acc. Chem. Res. ACS Applied Bio Materials ACS Appl. Electron. Mater. ACS Appl. Energy Mater. ACS Appl. Mater. Interfaces ACS Appl. Nano Mater. ACS Appl. Polym. Mater. ACS BIOMATER-SCI ENG ACS Catal. ACS Cent. Sci. ACS Chem. Biol. ACS Chemical Health & Safety ACS Chem. Neurosci. ACS Comb. Sci. ACS Earth Space Chem. ACS Energy Lett. ACS Infect. Dis. ACS Macro Lett. ACS Mater. Lett. ACS Med. Chem. Lett. ACS Nano ACS Omega ACS Photonics ACS Sens. ACS Sustainable Chem. Eng. ACS Synth. Biol. Anal. Chem. BIOCHEMISTRY-US Bioconjugate Chem. BIOMACROMOLECULES Chem. Res. Toxicol. Chem. Rev. Chem. Mater. CRYST GROWTH DES ENERG FUEL Environ. Sci. Technol. Environ. Sci. Technol. Lett. Eur. J. Inorg. Chem. IND ENG CHEM RES Inorg. Chem. J. Agric. Food. Chem. J. Chem. Eng. Data J. Chem. Educ. J. Chem. Inf. Model. J. Chem. Theory Comput. J. Med. Chem. J. Nat. Prod. J PROTEOME RES J. Am. Chem. Soc. LANGMUIR MACROMOLECULES Mol. Pharmaceutics Nano Lett. Org. Lett. ORG PROCESS RES DEV ORGANOMETALLICS J. Org. Chem. J. Phys. Chem. J. Phys. Chem. A J. Phys. Chem. B J. Phys. Chem. C J. Phys. Chem. Lett. Analyst Anal. Methods Biomater. Sci. Catal. Sci. Technol. Chem. Commun. Chem. Soc. Rev. CHEM EDUC RES PRACT CRYSTENGCOMM Dalton Trans. Energy Environ. Sci. ENVIRON SCI-NANO ENVIRON SCI-PROC IMP ENVIRON SCI-WAT RES Faraday Discuss. Food Funct. Green Chem. Inorg. Chem. Front. Integr. Biol. J. Anal. At. Spectrom. J. Mater. Chem. A J. Mater. Chem. B J. Mater. Chem. C Lab Chip Mater. Chem. Front. Mater. Horiz. MEDCHEMCOMM Metallomics Mol. Biosyst. Mol. Syst. Des. Eng. Nanoscale Nanoscale Horiz. Nat. Prod. Rep. New J. Chem. Org. Biomol. Chem. Org. Chem. Front. PHOTOCH PHOTOBIO SCI PCCP Polym. Chem.
﹀
mjeditor
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
Book学术官方微信
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1