首页 > 最新文献
paperpass

2017 2nd International Conference on Power and Renewable Energy (ICPRE)最新文献

英文 中文
Power system angular stability as affected by the reduced inertia due to wind displacing synchronous generators 风力置换同步发电机后惯性减小对电力系统角稳定性的影响
Pub Date : 2017-09-01 DOI: 10.1109/ICPRE.2017.8390567
Xiao Chen, W. Du, H. Wang
This paper investigates the power system angular stability as affected by the reduced inertia due to wind displacing synchronous generators. The investigation focuses on the change of the effect when the locations of displaced synchronous generators vary. Theoretical analysis is carried out on the basis of the continuum model of a power system, which is demonstrated and validated by simulation and computation of an example two-area multi-machine power system. It is shown in the paper that the effect of displacement on power system transient stability is beneficial if the displacement makes the system more “symmetrical” and vice versa, which is related with the steady-state load flow conditions and distribution of inertia of synchronous generators in the power system.
本文研究了同步发电机风力置换后惯性减小对电力系统角稳定性的影响。重点研究了同步发电机位移位置变化时的效果变化。在电力系统连续体模型的基础上进行了理论分析,并通过实例两区多机电力系统的仿真计算进行了验证。研究表明,如果位移使系统更加“对称”,则位移对电力系统暂态稳定的影响是有益的,反之亦然,这与电力系统中同步发电机的稳态潮流条件和惯性分布有关。
{"title":"Power system angular stability as affected by the reduced inertia due to wind displacing synchronous generators","authors":"Xiao Chen, W. Du, H. Wang","doi":"10.1109/ICPRE.2017.8390567","DOIUrl":"https://doi.org/10.1109/ICPRE.2017.8390567","url":null,"abstract":"This paper investigates the power system angular stability as affected by the reduced inertia due to wind displacing synchronous generators. The investigation focuses on the change of the effect when the locations of displaced synchronous generators vary. Theoretical analysis is carried out on the basis of the continuum model of a power system, which is demonstrated and validated by simulation and computation of an example two-area multi-machine power system. It is shown in the paper that the effect of displacement on power system transient stability is beneficial if the displacement makes the system more “symmetrical” and vice versa, which is related with the steady-state load flow conditions and distribution of inertia of synchronous generators in the power system.","PeriodicalId":123761,"journal":{"name":"2017 2nd International Conference on Power and Renewable Energy (ICPRE)","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129222658","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 6
Experimental study on the tolerance ability of adjustable speed drives to voltage sags 调速传动对电压跌落的容限能力实验研究
Pub Date : 2017-09-01 DOI: 10.1109/ICPRE.2017.8390551
Chenyi Li, Shuming Liu, Yingying Liu, Qionglin Li, Yonghai Xu
The process of energy transmitting is vulnerable to power quality problems. The adjustable speed drive (ASD) is one sensitive part of the process to voltage sags which will cause the interruption of the whole process if it trips due to sags. It is essential to analyze the voltage tolerance ability of ASDs and formulate a representative standard voltage tolerance curve (VTC) for it. Firstly, this paper analyzed basic influence principle of sags on ASDs and the influence of multiple factors on the voltage tolerance ability of ASDs, including sags types, load torque, motor speed, control strategy, pre-post sag voltage and harmonics. Then a test platform was established using the Chroma 61860 Regenerative Grid Simulator as the source of sag. 7 typical brands of ASDs with 2 kinds of rated power were selected to be tested. Later, sets of VTCs were obtained and further analyzed separately. The majority of the conclusions shows consistency to the theoretical analysis, but there are also some distinctions to the present conclusions. Finally, relatively universal VTCs for three of sags were proposed, which are of reference meaning to regulate the special standard curve for ASDs.
电能传输过程中容易出现电能质量问题。调速传动(ASD)是过程中对电压跌落敏感的部分,如果由于电压跌落而跳闸,将导致整个过程中断。分析asd的电压容差能力,制定具有代表性的标准电压容差曲线(VTC)是十分必要的。首先,分析了跌落对asd的基本影响原理,以及跌落类型、负载转矩、电机转速、控制策略、跌落前后电压、谐波等多种因素对asd电压容限能力的影响。然后以Chroma 61860再生网格模拟器作为凹陷源建立了测试平台。选取2种额定功率的7个典型品牌的asd进行测试。随后,获得VTCs集,并分别进行分析。大多数结论与理论分析一致,但也存在一些差异。最后,提出了三种凹陷相对通用的VTCs,对规范asd专用标准曲线具有参考意义。
{"title":"Experimental study on the tolerance ability of adjustable speed drives to voltage sags","authors":"Chenyi Li, Shuming Liu, Yingying Liu, Qionglin Li, Yonghai Xu","doi":"10.1109/ICPRE.2017.8390551","DOIUrl":"https://doi.org/10.1109/ICPRE.2017.8390551","url":null,"abstract":"The process of energy transmitting is vulnerable to power quality problems. The adjustable speed drive (ASD) is one sensitive part of the process to voltage sags which will cause the interruption of the whole process if it trips due to sags. It is essential to analyze the voltage tolerance ability of ASDs and formulate a representative standard voltage tolerance curve (VTC) for it. Firstly, this paper analyzed basic influence principle of sags on ASDs and the influence of multiple factors on the voltage tolerance ability of ASDs, including sags types, load torque, motor speed, control strategy, pre-post sag voltage and harmonics. Then a test platform was established using the Chroma 61860 Regenerative Grid Simulator as the source of sag. 7 typical brands of ASDs with 2 kinds of rated power were selected to be tested. Later, sets of VTCs were obtained and further analyzed separately. The majority of the conclusions shows consistency to the theoretical analysis, but there are also some distinctions to the present conclusions. Finally, relatively universal VTCs for three of sags were proposed, which are of reference meaning to regulate the special standard curve for ASDs.","PeriodicalId":123761,"journal":{"name":"2017 2nd International Conference on Power and Renewable Energy (ICPRE)","volume":"224 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114691792","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
The simulation analyses of Jinnan ± 800kV UHVDC transmission control system based on PSCAD/EMTDC 基于PSCAD/EMTDC的晋南±800kV特高压直流输电控制系统仿真分析
Pub Date : 2017-09-01 DOI: 10.1109/ICPRE.2017.8390553
Huidong Guo, Mengqiong Wang, Yuxin Shi, Zhenguo Ma
Taking Jinnan ± 800kV ultra-high voltage direct current power transmission system as study object, this paper discusses simulation model of UHVDC by PSCAD /EMTDC (Power system computer aided design and electric magnetic transient in DC system). Compared with the waveform in actual engineering system debugging, the results of a series of simulation analyses show that the ± 800kV UHVDC system constructed is reliable. The simulation platform can deeply study the control system of UHVDC, which has the practical significance of engineering.
以晋南±800kV特高压直流输电系统为研究对象,探讨了PSCAD /EMTDC(电力系统计算机辅助设计与直流系统电磁暂态)对特高压直流系统的仿真模型。通过与实际工程系统调试波形的对比,进行了一系列仿真分析,结果表明所构建的±800kV特高压直流系统是可靠的。该仿真平台可以对特高压直流输电控制系统进行深入的研究,具有工程实际意义。
{"title":"The simulation analyses of Jinnan ± 800kV UHVDC transmission control system based on PSCAD/EMTDC","authors":"Huidong Guo, Mengqiong Wang, Yuxin Shi, Zhenguo Ma","doi":"10.1109/ICPRE.2017.8390553","DOIUrl":"https://doi.org/10.1109/ICPRE.2017.8390553","url":null,"abstract":"Taking Jinnan ± 800kV ultra-high voltage direct current power transmission system as study object, this paper discusses simulation model of UHVDC by PSCAD /EMTDC (Power system computer aided design and electric magnetic transient in DC system). Compared with the waveform in actual engineering system debugging, the results of a series of simulation analyses show that the ± 800kV UHVDC system constructed is reliable. The simulation platform can deeply study the control system of UHVDC, which has the practical significance of engineering.","PeriodicalId":123761,"journal":{"name":"2017 2nd International Conference on Power and Renewable Energy (ICPRE)","volume":"283 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124518767","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Monitoring of optical power in fiber communication for secondary equipment in smart substation 智能变电站二次设备光纤通信光功率监测
Pub Date : 2017-09-01 DOI: 10.1109/ICPRE.2017.8390610
Jiaxu Guo, Qi Huang, Sinian Xiong, Shi Jing, W. Zhen, Jie Ren
Information communication system is one of the keys to the implementation of a smart substation, therefore monitoring of optical power for the secondary equipment network is helpful to improve the security and stability of communication in substation. Based on a study of the existing monitoring methods of optical fiber communication in smart substation, a monitoring system of optical power is proposed by analyzing the historical data and historical trend. Some key parts such as the framework for the monitoring system of optical power, template library of component, historical database and the analysis of historical trend are implemented. In this monitoring system, prediction of changes in optical power based on historical trend is designed and analyzed. Finally, the feasibility of the monitoring method of optical power in fiber communication for secondary equipment and using it as a prejudgment to retrieve abnormal communication state are verified by a practical example.
信息通信系统是智能变电站实现的关键之一,因此对二次设备网光功率进行监控有助于提高变电站通信的安全性和稳定性。在研究智能变电站现有光纤通信监控方法的基础上,通过分析历史数据和历史趋势,提出了一种光功率监控系统。实现了光功率监控系统的框架、组件模板库、历史数据库和历史趋势分析等关键部分。在该监测系统中,设计并分析了基于历史趋势的光功率变化预测。最后,通过实例验证了二次设备光纤通信中光功率监测方法的可行性,并将其作为一种预判手段来检索异常通信状态。
{"title":"Monitoring of optical power in fiber communication for secondary equipment in smart substation","authors":"Jiaxu Guo, Qi Huang, Sinian Xiong, Shi Jing, W. Zhen, Jie Ren","doi":"10.1109/ICPRE.2017.8390610","DOIUrl":"https://doi.org/10.1109/ICPRE.2017.8390610","url":null,"abstract":"Information communication system is one of the keys to the implementation of a smart substation, therefore monitoring of optical power for the secondary equipment network is helpful to improve the security and stability of communication in substation. Based on a study of the existing monitoring methods of optical fiber communication in smart substation, a monitoring system of optical power is proposed by analyzing the historical data and historical trend. Some key parts such as the framework for the monitoring system of optical power, template library of component, historical database and the analysis of historical trend are implemented. In this monitoring system, prediction of changes in optical power based on historical trend is designed and analyzed. Finally, the feasibility of the monitoring method of optical power in fiber communication for secondary equipment and using it as a prejudgment to retrieve abnormal communication state are verified by a practical example.","PeriodicalId":123761,"journal":{"name":"2017 2nd International Conference on Power and Renewable Energy (ICPRE)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124067408","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Analysis of subsynchronous oscillation characteristics and its dominant factors in the DFIG-based wind farm with fixed series compensation 固定串联补偿的dfig型风电场次同步振荡特性及其主导因素分析
Pub Date : 2017-09-01 DOI: 10.1109/ICPRE.2017.8390511
Guoliang Zhao, Hongyang Yu, Kun Zhang, Zongye Liu, Xiaohan Zhang, Lin Yang
Aiming at subsynchronous oscillation (SSO) in doubly fed induction generator (DFIG) based wind farm with fixed series compensation (FSC), this paper analyze its characteristics based on eigenvalue analysis. Analysis results indicate that this kind of SSO is the electrical interaction related to the generator, converter and FSC, and its basic characteristics are similar with induction generator effect (IGE). The root causes include negative resistors effect related to the rotor resistor and current inner loop of rotor side converter (RSC) in subsynchronous frequency range, and subsynchronous modulation effect of the converters.
针对双馈感应发电机(DFIG)固定串联补偿(FSC)风电场的次同步振荡问题,基于特征值分析方法分析了其特性。分析结果表明,该效应是与发电机、变流器和FSC有关的电相互作用,其基本特征与感应发电机效应(IGE)相似。其根本原因包括转子侧变换器(RSC)在次同步频率范围内转子电阻和电流内环的负电阻效应以及变换器的次同步调制效应。
{"title":"Analysis of subsynchronous oscillation characteristics and its dominant factors in the DFIG-based wind farm with fixed series compensation","authors":"Guoliang Zhao, Hongyang Yu, Kun Zhang, Zongye Liu, Xiaohan Zhang, Lin Yang","doi":"10.1109/ICPRE.2017.8390511","DOIUrl":"https://doi.org/10.1109/ICPRE.2017.8390511","url":null,"abstract":"Aiming at subsynchronous oscillation (SSO) in doubly fed induction generator (DFIG) based wind farm with fixed series compensation (FSC), this paper analyze its characteristics based on eigenvalue analysis. Analysis results indicate that this kind of SSO is the electrical interaction related to the generator, converter and FSC, and its basic characteristics are similar with induction generator effect (IGE). The root causes include negative resistors effect related to the rotor resistor and current inner loop of rotor side converter (RSC) in subsynchronous frequency range, and subsynchronous modulation effect of the converters.","PeriodicalId":123761,"journal":{"name":"2017 2nd International Conference on Power and Renewable Energy (ICPRE)","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125778537","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Maximum power point performance tracking comparison between incremental conductance with perturb and observe algorithms in photovoltaic power systems 光伏发电系统电导增量摄动与观测算法最大功率点性能跟踪比较
Pub Date : 2017-09-01 DOI: 10.1109/ICPRE.2017.8390668
Samuel Bimenyimana, Godwin Norense Osarumwense Asemota, Ling-ling Li
Electric power from solar energy technologies is gaining great and important uses because of cleanness, free, no noise and little maintenance. Their characteristic output power depends on fluctuating climatic conditions like temperature, cloud cover, and irradiance. Since climate is not always uniform, maximum power point tracking techniques are used in solar power systems to extract maximum power from photovoltaic systems. In this paper, voltage and current data from a 50 W stand-alone photovoltaic module located in Rwamagana district, Rwanda were recorded and used to compare the performance between incremental conductance algorithm with perturb and observe algorithm for maximum power point tracking. The maximum power point of 12.044 W was achieved at 15 hours for the incremental conductance algorithm. Both I-V and P-V characteristics of PV system show n-shaped nonlinear conductance and n-shaped nonlinear current characteristic curves. An equation was developed for the dissipative saw-tooth wave irradiance characteristic curve, at fairly constant temperatures, in the study.
由于清洁、免费、无噪音和维护少,太阳能发电技术正在获得巨大而重要的应用。它们的特性输出功率取决于波动的气候条件,如温度、云量和辐照度。由于气候并不总是均匀的,因此在太阳能发电系统中使用最大功率点跟踪技术来从光伏系统中提取最大功率。本文记录了位于卢旺达Rwamagana地区的50w独立光伏组件的电压和电流数据,并比较了带摄动的增量电导算法和观测算法在最大功率点跟踪中的性能。增量电导算法在15h时达到了12.044 W的最大功率点。光伏系统的I-V和P-V特性均表现为n型非线性电导和n型非线性电流特性曲线。在相当恒定的温度下,建立了耗散锯齿波辐照度特性曲线的方程。
{"title":"Maximum power point performance tracking comparison between incremental conductance with perturb and observe algorithms in photovoltaic power systems","authors":"Samuel Bimenyimana, Godwin Norense Osarumwense Asemota, Ling-ling Li","doi":"10.1109/ICPRE.2017.8390668","DOIUrl":"https://doi.org/10.1109/ICPRE.2017.8390668","url":null,"abstract":"Electric power from solar energy technologies is gaining great and important uses because of cleanness, free, no noise and little maintenance. Their characteristic output power depends on fluctuating climatic conditions like temperature, cloud cover, and irradiance. Since climate is not always uniform, maximum power point tracking techniques are used in solar power systems to extract maximum power from photovoltaic systems. In this paper, voltage and current data from a 50 W stand-alone photovoltaic module located in Rwamagana district, Rwanda were recorded and used to compare the performance between incremental conductance algorithm with perturb and observe algorithm for maximum power point tracking. The maximum power point of 12.044 W was achieved at 15 hours for the incremental conductance algorithm. Both I-V and P-V characteristics of PV system show n-shaped nonlinear conductance and n-shaped nonlinear current characteristic curves. An equation was developed for the dissipative saw-tooth wave irradiance characteristic curve, at fairly constant temperatures, in the study.","PeriodicalId":123761,"journal":{"name":"2017 2nd International Conference on Power and Renewable Energy (ICPRE)","volume":"179 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133888041","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Multi-source optimal schedule of power system considering smoothing effect of wind and photovoltaic sources 考虑风力和光伏源平滑效应的电力系统多源优化调度
Pub Date : 2017-09-01 DOI: 10.1109/ICPRE.2017.8390606
Dandan Sun, S. Miao, Lixing Li, Chang Ye, Kaiyun Chao
The integration of extensive wind and solar power into power system brings great threat to the safe and stable operation of the grid, as well as decreasing the economy of unit commitment. In this paper, a multi-source optimal schedule of power system considering smoothing effect of wind and photovoltaic sources is proposed to alleviate the adverse effect of wind and solar power and to realize the economic operation. The cluster composed of six wind power plants and three photovoltaic plants in Portland of America is adopted as the study objective. Firstly, index for assessing smoothing effect is proposed and the influence factors of smoothing effect are analyzed. Secondly, six typical weather patterns are identified based on the power output fluctuation of the wind and solar. Thirdly, a multi-source complementary double layer optimal scheduling model is established which takes different weather types into consideration. Finally, case study shows that the model can efficiently increase the economy of unit commitment and stabilize the power system.
广泛的风能和太阳能并网给电网的安全稳定运行带来了很大的威胁,同时也降低了机组的经济性。为了减轻风能和太阳能的不利影响,实现电力系统的经济运行,本文提出了考虑风能和光伏源平滑效应的电力系统多源优化调度方案。以美国波特兰6个风力发电厂和3个光伏发电厂组成的集群为研究对象。首先,提出了评价平滑效果的指标,分析了影响平滑效果的因素。其次,根据风能和太阳能的输出波动,确定了六种典型的天气模式。第三,建立了考虑不同天气类型的多源互补双层最优调度模型。实例分析表明,该模型能有效地提高机组投入经济性,稳定电力系统。
{"title":"Multi-source optimal schedule of power system considering smoothing effect of wind and photovoltaic sources","authors":"Dandan Sun, S. Miao, Lixing Li, Chang Ye, Kaiyun Chao","doi":"10.1109/ICPRE.2017.8390606","DOIUrl":"https://doi.org/10.1109/ICPRE.2017.8390606","url":null,"abstract":"The integration of extensive wind and solar power into power system brings great threat to the safe and stable operation of the grid, as well as decreasing the economy of unit commitment. In this paper, a multi-source optimal schedule of power system considering smoothing effect of wind and photovoltaic sources is proposed to alleviate the adverse effect of wind and solar power and to realize the economic operation. The cluster composed of six wind power plants and three photovoltaic plants in Portland of America is adopted as the study objective. Firstly, index for assessing smoothing effect is proposed and the influence factors of smoothing effect are analyzed. Secondly, six typical weather patterns are identified based on the power output fluctuation of the wind and solar. Thirdly, a multi-source complementary double layer optimal scheduling model is established which takes different weather types into consideration. Finally, case study shows that the model can efficiently increase the economy of unit commitment and stabilize the power system.","PeriodicalId":123761,"journal":{"name":"2017 2nd International Conference on Power and Renewable Energy (ICPRE)","volume":"146 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134361823","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
ZIP and equivalent thermostatic loads impacts on energy savings of conservation voltage reduction ZIP和等效恒温负荷对节能降压的影响
Pub Date : 2017-09-01 DOI: 10.1109/ICPRE.2017.8390537
Jun Wang, Qi Hunag, Ashhar Raza, Tianqi Hong, Zhenyuan Zhang, Hongyan Li
Conservation voltage reduction (CVR) plays an important role in energy savings. Loads can be modeled as static ZIP coefficients or as equivalent thermostatic loads (ETLs) for CVR peak demand and energy savings calculations. In this paper, simulations of a benchmark 69-bus distribution system show that ETLs can better capture end-use loads power and energy changes as ambient temperature varies. The analysis of results demonstrates that customer loads modeled as ETLs are more accurate than loads modeled as ZIP coefficients in the calculation of energy savings and peak demand of CVR.
节能降压(CVR)在节能方面具有重要作用。负载可以建模为静态ZIP系数或等效恒温负载(etl),用于CVR峰值需求和节能计算。本文对一个基准的69总线配电系统进行了仿真,结果表明etl可以更好地捕捉终端负载的功率和能量随环境温度变化的变化。分析结果表明,以etl为模型的客户负荷比以ZIP系数为模型的负荷更准确地计算了CVR的节能和峰值需求。
{"title":"ZIP and equivalent thermostatic loads impacts on energy savings of conservation voltage reduction","authors":"Jun Wang, Qi Hunag, Ashhar Raza, Tianqi Hong, Zhenyuan Zhang, Hongyan Li","doi":"10.1109/ICPRE.2017.8390537","DOIUrl":"https://doi.org/10.1109/ICPRE.2017.8390537","url":null,"abstract":"Conservation voltage reduction (CVR) plays an important role in energy savings. Loads can be modeled as static ZIP coefficients or as equivalent thermostatic loads (ETLs) for CVR peak demand and energy savings calculations. In this paper, simulations of a benchmark 69-bus distribution system show that ETLs can better capture end-use loads power and energy changes as ambient temperature varies. The analysis of results demonstrates that customer loads modeled as ETLs are more accurate than loads modeled as ZIP coefficients in the calculation of energy savings and peak demand of CVR.","PeriodicalId":123761,"journal":{"name":"2017 2nd International Conference on Power and Renewable Energy (ICPRE)","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131470608","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Coupling characteristics and mechanism of the dynamic behaviors of high and low voltage power grid 高低压电网动态行为的耦合特性及机理
Pub Date : 2017-09-01 DOI: 10.1109/ICPRE.2017.8390685
Zhenhuan Yuan, Hengxu Zhang, Fang Shi, Changhui Ma, Gang Liu
The increasing complexity of the dynamic behavior of low-voltage (LV) power grid makes it necessary for synchronous phasor measurement in LV grids. After a large disturbance, the dynamic behavior detected at the LV level is the coupling between dynamic behaviors of high-voltage (HV) major grid and LV local grid, which needs to be decoupled for different applications. This paper analyzes the response characteristics of LV power grid to a variety of common disturbances and proposes a mathematical model for the synchronized measurement data of high and low voltage grids. The coupling phenomenon of dynamic behaviors is explained for different load models. Finally, the theoretical analysis is verified by simulation.
随着低压电网动态特性的日益复杂,需要对低压电网进行同步相量测量。在大扰动后,低压电平检测到的动态行为是高压主电网与低压局部电网动态行为之间的耦合,需要根据不同的应用进行解耦。分析了低压电网对各种常见干扰的响应特性,提出了高低压电网同步测量数据的数学模型。解释了不同荷载模型下的动力特性耦合现象。最后,通过仿真验证了理论分析的正确性。
{"title":"Coupling characteristics and mechanism of the dynamic behaviors of high and low voltage power grid","authors":"Zhenhuan Yuan, Hengxu Zhang, Fang Shi, Changhui Ma, Gang Liu","doi":"10.1109/ICPRE.2017.8390685","DOIUrl":"https://doi.org/10.1109/ICPRE.2017.8390685","url":null,"abstract":"The increasing complexity of the dynamic behavior of low-voltage (LV) power grid makes it necessary for synchronous phasor measurement in LV grids. After a large disturbance, the dynamic behavior detected at the LV level is the coupling between dynamic behaviors of high-voltage (HV) major grid and LV local grid, which needs to be decoupled for different applications. This paper analyzes the response characteristics of LV power grid to a variety of common disturbances and proposes a mathematical model for the synchronized measurement data of high and low voltage grids. The coupling phenomenon of dynamic behaviors is explained for different load models. Finally, the theoretical analysis is verified by simulation.","PeriodicalId":123761,"journal":{"name":"2017 2nd International Conference on Power and Renewable Energy (ICPRE)","volume":"47 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115637498","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Research and simulation of centralized charge and discharge technology of EVs based on MMC 基于MMC的电动汽车集中充放电技术研究与仿真
Pub Date : 2017-09-01 DOI: 10.1109/ICPRE.2017.8390644
Zhuowu Yan, Z. Yin, Xiaotian Yang, Kai Zhang, Jing Shi, Liqiang Wang
In order to meet the requirements of large-scale EVs (electric vehicles) centralized charge and discharge in a specific situation and solve the resulting serious problem such as three-phase unbalance, high grid-connected harmonic contents and so on, this paper proposes a large-scale centralized charge and discharge system of EVs based on modular multilevel converter (MMC). The topology is based on the traditional MMC, and connects to EVs by bidirectional Buck/Boost circuit in each submodules, which makes bidirectional flow of power between grid and power battery of EVs in submodules. The control strategy of converter level, voltage balance strategy that corresponding to carrier phase shift modulation and Buck/Boost control strategy in submodules are researched, and the power quality problems caused by large-scale charge and discharge is avoided. The simulation based on Matlab/Simulink verifies feasibility of the system structure and the effectiveness of the control strategy.
为了满足大型电动汽车(电动汽车)在特定情况下集中充放电的要求,解决由此产生的三相不平衡、并网谐波含量高等严重问题,本文提出了一种基于模块化多电平变换器(MMC)的大型电动汽车集中充放电系统。该拓扑以传统的MMC为基础,通过各子模块的双向Buck/Boost电路与电动汽车连接,实现了子模块电动汽车的电网与动力电池之间的双向流动。研究了变换器电平控制策略、载波移相调制对应的电压平衡策略和子模块Buck/Boost控制策略,避免了大规模充放电带来的电能质量问题。基于Matlab/Simulink的仿真验证了系统结构的可行性和控制策略的有效性。
{"title":"Research and simulation of centralized charge and discharge technology of EVs based on MMC","authors":"Zhuowu Yan, Z. Yin, Xiaotian Yang, Kai Zhang, Jing Shi, Liqiang Wang","doi":"10.1109/ICPRE.2017.8390644","DOIUrl":"https://doi.org/10.1109/ICPRE.2017.8390644","url":null,"abstract":"In order to meet the requirements of large-scale EVs (electric vehicles) centralized charge and discharge in a specific situation and solve the resulting serious problem such as three-phase unbalance, high grid-connected harmonic contents and so on, this paper proposes a large-scale centralized charge and discharge system of EVs based on modular multilevel converter (MMC). The topology is based on the traditional MMC, and connects to EVs by bidirectional Buck/Boost circuit in each submodules, which makes bidirectional flow of power between grid and power battery of EVs in submodules. The control strategy of converter level, voltage balance strategy that corresponding to carrier phase shift modulation and Buck/Boost control strategy in submodules are researched, and the power quality problems caused by large-scale charge and discharge is avoided. The simulation based on Matlab/Simulink verifies feasibility of the system structure and the effectiveness of the control strategy.","PeriodicalId":123761,"journal":{"name":"2017 2nd International Conference on Power and Renewable Energy (ICPRE)","volume":"79 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122061224","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
期刊
2017 2nd International Conference on Power and Renewable Energy (ICPRE)
全部 Acc. Chem. Res. ACS Applied Bio Materials ACS Appl. Electron. Mater. ACS Appl. Energy Mater. ACS Appl. Mater. Interfaces ACS Appl. Nano Mater. ACS Appl. Polym. Mater. ACS BIOMATER-SCI ENG ACS Catal. ACS Cent. Sci. ACS Chem. Biol. ACS Chemical Health & Safety ACS Chem. Neurosci. ACS Comb. Sci. ACS Earth Space Chem. ACS Energy Lett. ACS Infect. Dis. ACS Macro Lett. ACS Mater. Lett. ACS Med. Chem. Lett. ACS Nano ACS Omega ACS Photonics ACS Sens. ACS Sustainable Chem. Eng. ACS Synth. Biol. Anal. Chem. BIOCHEMISTRY-US Bioconjugate Chem. BIOMACROMOLECULES Chem. Res. Toxicol. Chem. Rev. Chem. Mater. CRYST GROWTH DES ENERG FUEL Environ. Sci. Technol. Environ. Sci. Technol. Lett. Eur. J. Inorg. Chem. IND ENG CHEM RES Inorg. Chem. J. Agric. Food. Chem. J. Chem. Eng. Data J. Chem. Educ. J. Chem. Inf. Model. J. Chem. Theory Comput. J. Med. Chem. J. Nat. Prod. J PROTEOME RES J. Am. Chem. Soc. LANGMUIR MACROMOLECULES Mol. Pharmaceutics Nano Lett. Org. Lett. ORG PROCESS RES DEV ORGANOMETALLICS J. Org. Chem. J. Phys. Chem. J. Phys. Chem. A J. Phys. Chem. B J. Phys. Chem. C J. Phys. Chem. Lett. Analyst Anal. Methods Biomater. Sci. Catal. Sci. Technol. Chem. Commun. Chem. Soc. Rev. CHEM EDUC RES PRACT CRYSTENGCOMM Dalton Trans. Energy Environ. Sci. ENVIRON SCI-NANO ENVIRON SCI-PROC IMP ENVIRON SCI-WAT RES Faraday Discuss. Food Funct. Green Chem. Inorg. Chem. Front. Integr. Biol. J. Anal. At. Spectrom. J. Mater. Chem. A J. Mater. Chem. B J. Mater. Chem. C Lab Chip Mater. Chem. Front. Mater. Horiz. MEDCHEMCOMM Metallomics Mol. Biosyst. Mol. Syst. Des. Eng. Nanoscale Nanoscale Horiz. Nat. Prod. Rep. New J. Chem. Org. Biomol. Chem. Org. Chem. Front. PHOTOCH PHOTOBIO SCI PCCP Polym. Chem.
﹀
mjeditor
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
Book学术官方微信
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1