Pub Date : 2018-09-01DOI: 10.1109/ICCCE.2018.8539294
Nur Zamira Hamid, A. L. Asnawi, W. Morshidi, A. Ruslan, Nurul Atiqah Jundi, H. Ramli
As many cases of accidents have been reported especially in industrial area, it is very crucial to take an initiative to reduce the accidents rate. The aim of this project is to design and develop an IoT device that is capable of monitoring human critical condition at industrial workplace. This device can help in giving forewarning to the person in charge about the surrounding of the worker if it is harmful for him/her. Besides, if the accident is already occurred, this device can help in reducing the time between the moment the accident happen and the moment the emergency care is taken to avoid any possible serious problem. This device uses several types of sensors to detect the surrounding temperature and air quality level, and movement of the user. The methods for developing this device is divided into three parts which is coding the microcontroller to accept the raw data, then connect the previous configuration with Wi-Fi module, and finally connect the whole previous data with web server, Thingspeak. The results succefully showed the reading from all sensors which include surrounding temperature, air quality level, normal and rotational acceleration, and emergency push button data. It is expected that this device can be one of the initiatives to help reducing the accidents rate in workplace especially in industrial area.
{"title":"Design of a Wireless Device for Monitoring Human Critical Condition at Industrial Workplace","authors":"Nur Zamira Hamid, A. L. Asnawi, W. Morshidi, A. Ruslan, Nurul Atiqah Jundi, H. Ramli","doi":"10.1109/ICCCE.2018.8539294","DOIUrl":"https://doi.org/10.1109/ICCCE.2018.8539294","url":null,"abstract":"As many cases of accidents have been reported especially in industrial area, it is very crucial to take an initiative to reduce the accidents rate. The aim of this project is to design and develop an IoT device that is capable of monitoring human critical condition at industrial workplace. This device can help in giving forewarning to the person in charge about the surrounding of the worker if it is harmful for him/her. Besides, if the accident is already occurred, this device can help in reducing the time between the moment the accident happen and the moment the emergency care is taken to avoid any possible serious problem. This device uses several types of sensors to detect the surrounding temperature and air quality level, and movement of the user. The methods for developing this device is divided into three parts which is coding the microcontroller to accept the raw data, then connect the previous configuration with Wi-Fi module, and finally connect the whole previous data with web server, Thingspeak. The results succefully showed the reading from all sensors which include surrounding temperature, air quality level, normal and rotational acceleration, and emergency push button data. It is expected that this device can be one of the initiatives to help reducing the accidents rate in workplace especially in industrial area.","PeriodicalId":260264,"journal":{"name":"2018 7th International Conference on Computer and Communication Engineering (ICCCE)","volume":"178 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122313992","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-01DOI: 10.1109/ICCCE.2018.8539272
Ain Najihah Baharudin, M. H. Habaebi, Farah Diyana Abdul Rahman
This paper aims to design a smart communicating toys system equipped with laser sensors that can send and receive the data message based on the conversion of data from ASCII to binary code. The system intents to offer two-ways communication toys that will be a new medium for educational purposes for kids in their developmental stages in which both players can send and receive the data to and from each other and equipped with sound indicator module to alert the player. Lastly, functionality and system testing were conducted to verify the functionalities of the system.
{"title":"A Laser Pointer Communicating Toy","authors":"Ain Najihah Baharudin, M. H. Habaebi, Farah Diyana Abdul Rahman","doi":"10.1109/ICCCE.2018.8539272","DOIUrl":"https://doi.org/10.1109/ICCCE.2018.8539272","url":null,"abstract":"This paper aims to design a smart communicating toys system equipped with laser sensors that can send and receive the data message based on the conversion of data from ASCII to binary code. The system intents to offer two-ways communication toys that will be a new medium for educational purposes for kids in their developmental stages in which both players can send and receive the data to and from each other and equipped with sound indicator module to alert the player. Lastly, functionality and system testing were conducted to verify the functionalities of the system.","PeriodicalId":260264,"journal":{"name":"2018 7th International Conference on Computer and Communication Engineering (ICCCE)","volume":"213 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121722023","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-01DOI: 10.1109/ICCCE.2018.8539340
A. Rahim, N. Ramli, A. Nordin
A simple RC equivalent circuit model often used to represents a supercapacitor. The model is far from accurately model the behavior of the device. A 2cm by 2 cm supercapacitor prototype based on Activated carbon as the active electrode material and NaOH as the electrolyte was fabricated. This prototype was characterized using Cyclic Voltammetry and Galvanostatic Charge Discharge to get the supercapacitor working potential window, capacitance and internal resistance. The device works up to 0.7V with capacitance of up to 1.6F and internal resistance as low as 190 Ohm was found for the prototype. Several equivalent circuit model of a supercapacitor was simulated to produce similar response of the prototype. Multiple Branch Parallel RC circuit response profile fit the experimental profile the best.
{"title":"Fabrication and Characterization of Supercapacitor with Activated Carbon Electrode and NaOH Electrolyte","authors":"A. Rahim, N. Ramli, A. Nordin","doi":"10.1109/ICCCE.2018.8539340","DOIUrl":"https://doi.org/10.1109/ICCCE.2018.8539340","url":null,"abstract":"A simple RC equivalent circuit model often used to represents a supercapacitor. The model is far from accurately model the behavior of the device. A 2cm by 2 cm supercapacitor prototype based on Activated carbon as the active electrode material and NaOH as the electrolyte was fabricated. This prototype was characterized using Cyclic Voltammetry and Galvanostatic Charge Discharge to get the supercapacitor working potential window, capacitance and internal resistance. The device works up to 0.7V with capacitance of up to 1.6F and internal resistance as low as 190 Ohm was found for the prototype. Several equivalent circuit model of a supercapacitor was simulated to produce similar response of the prototype. Multiple Branch Parallel RC circuit response profile fit the experimental profile the best.","PeriodicalId":260264,"journal":{"name":"2018 7th International Conference on Computer and Communication Engineering (ICCCE)","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129254268","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-01DOI: 10.1109/ICCCE.2018.8539316
A. Nugraha, R. Wibowo, M. Suryanegara, Nur Hayati
This paper investigates the performance of battery capacity in the proposed IoT-LoRa device to track and monitor a patient with a mental disorder. Reduction of battery capacity was correlated against the movement speed of users. Three experimental scenarios were conducted for a patient moving at 1–3 km/h, 5–8 km/h, and 1–30 km/h. The real time data were taken from two multinode LoRa units at 10 different locational points with a time interval of 30 minutes. The experiment had 113 data iterations to determine percentage of battery capacity and RSSI level. It was found that the faster a patient is moving, the greater the capacity of the battery reduces.
{"title":"An IoT-LoRa System for Tracking a Patient with a Mental Disorder: Correlation between Battery Capacity and Speed of Movement","authors":"A. Nugraha, R. Wibowo, M. Suryanegara, Nur Hayati","doi":"10.1109/ICCCE.2018.8539316","DOIUrl":"https://doi.org/10.1109/ICCCE.2018.8539316","url":null,"abstract":"This paper investigates the performance of battery capacity in the proposed IoT-LoRa device to track and monitor a patient with a mental disorder. Reduction of battery capacity was correlated against the movement speed of users. Three experimental scenarios were conducted for a patient moving at 1–3 km/h, 5–8 km/h, and 1–30 km/h. The real time data were taken from two multinode LoRa units at 10 different locational points with a time interval of 30 minutes. The experiment had 113 data iterations to determine percentage of battery capacity and RSSI level. It was found that the faster a patient is moving, the greater the capacity of the battery reduces.","PeriodicalId":260264,"journal":{"name":"2018 7th International Conference on Computer and Communication Engineering (ICCCE)","volume":"68 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130497502","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-01DOI: 10.1109/ICCCE.2018.8539258
M. Ebrahim Abidi, A. L. Asnawi, Nor F. M. Azmin, A. Jusoh, S. Noorjannah Ibrahim, H. Ramli, N. A. Malek
This paper presents a remote development of voice control and home security for smart home automation system using Arduino mega, GSM SIM900A, Bluetooth module, and HC-SR04 ultrasonic sensor. A microcontroller is programmed to control up to four home appliances via Bluetooth technology and transmit the received signal from sensor to user smartphone. Nowadays, there have been many commercials and research projects on smart homes but most of these products utilize remote control which have button on touch screen. In addition, there is also a need to give supporting system for people especially to the elderly, disabled, and increase their home security. Hence, we proposed a development of a wireless remote control for home gadgets which can be controlled with voice. This proposed system is expected to recognize human voice using voice reader android application to turn on and off home appliance. Another important feature developed in this project is on the detection of movement, using ultrasonic sensor, in which the signal is converted to message and forwarded to the mobile user via GSM module. The accuracy of the system is found to be above 95% and the electrical loads have been successfully controlled using voice command in controlling their home. In order for the system to work, it is necessary to power up Arduino Mega by 12V DC adaptor and connecting all AC power loads to the electricity. In this project, the proposed prototype of smart home automation system is implemented and tested on hardware so the user can control certain number of home appliances using voice.
{"title":"Development of Voice Control and Home Security for Smart Home Automation","authors":"M. Ebrahim Abidi, A. L. Asnawi, Nor F. M. Azmin, A. Jusoh, S. Noorjannah Ibrahim, H. Ramli, N. A. Malek","doi":"10.1109/ICCCE.2018.8539258","DOIUrl":"https://doi.org/10.1109/ICCCE.2018.8539258","url":null,"abstract":"This paper presents a remote development of voice control and home security for smart home automation system using Arduino mega, GSM SIM900A, Bluetooth module, and HC-SR04 ultrasonic sensor. A microcontroller is programmed to control up to four home appliances via Bluetooth technology and transmit the received signal from sensor to user smartphone. Nowadays, there have been many commercials and research projects on smart homes but most of these products utilize remote control which have button on touch screen. In addition, there is also a need to give supporting system for people especially to the elderly, disabled, and increase their home security. Hence, we proposed a development of a wireless remote control for home gadgets which can be controlled with voice. This proposed system is expected to recognize human voice using voice reader android application to turn on and off home appliance. Another important feature developed in this project is on the detection of movement, using ultrasonic sensor, in which the signal is converted to message and forwarded to the mobile user via GSM module. The accuracy of the system is found to be above 95% and the electrical loads have been successfully controlled using voice command in controlling their home. In order for the system to work, it is necessary to power up Arduino Mega by 12V DC adaptor and connecting all AC power loads to the electricity. In this project, the proposed prototype of smart home automation system is implemented and tested on hardware so the user can control certain number of home appliances using voice.","PeriodicalId":260264,"journal":{"name":"2018 7th International Conference on Computer and Communication Engineering (ICCCE)","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129986330","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-01DOI: 10.1109/ICCCE.2018.8539255
F. Shaikh, Sheroz Khan, A. Alam, D. Baillargeat, M. H. Habaebi, M. Yaacob, J. Shah, Z. Shahid
In this paper, an Ultra-wideband Balance Antipodal Vivaldi Antenna in planar and h-plane array configuration is presented. The comparison of four elements of BAVA array in both planes has been observed. Each element of an antenna printed on the glass-reinforced epoxy laminate material (FR4) with a thickness of 1.5mm and relative permittivity of 4.3. The dimension of every single element is 60.75mm $times$ 66mm approximately. The array elements of both planes almost cover the whole UWB frequency range with the reflection coefficient of −10dB. Based on the simulation results, the array elements in planar configuration showing good reflection and works well at 3.2GHz frequency while the configuration in h-plane the array elements works well at 7GHz of frequency. In planar configuration, the operating frequency of antenna elements is shifting as a result of the distance between inter elements which intensification in wavelength. The array elements in h-plane produce more gain up to 10.2 dB with good radiation patterns as compared to the planar plane. The antenna design and optimization development are verified using CST simulation software.
{"title":"Comparative Analysis of UWB Balance Antipodal Vivaldi Antenna for Array Configuration","authors":"F. Shaikh, Sheroz Khan, A. Alam, D. Baillargeat, M. H. Habaebi, M. Yaacob, J. Shah, Z. Shahid","doi":"10.1109/ICCCE.2018.8539255","DOIUrl":"https://doi.org/10.1109/ICCCE.2018.8539255","url":null,"abstract":"In this paper, an Ultra-wideband Balance Antipodal Vivaldi Antenna in planar and h-plane array configuration is presented. The comparison of four elements of BAVA array in both planes has been observed. Each element of an antenna printed on the glass-reinforced epoxy laminate material (FR4) with a thickness of 1.5mm and relative permittivity of 4.3. The dimension of every single element is 60.75mm $times$ 66mm approximately. The array elements of both planes almost cover the whole UWB frequency range with the reflection coefficient of −10dB. Based on the simulation results, the array elements in planar configuration showing good reflection and works well at 3.2GHz frequency while the configuration in h-plane the array elements works well at 7GHz of frequency. In planar configuration, the operating frequency of antenna elements is shifting as a result of the distance between inter elements which intensification in wavelength. The array elements in h-plane produce more gain up to 10.2 dB with good radiation patterns as compared to the planar plane. The antenna design and optimization development are verified using CST simulation software.","PeriodicalId":260264,"journal":{"name":"2018 7th International Conference on Computer and Communication Engineering (ICCCE)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130792000","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-01DOI: 10.1109/ICCCE.2018.8539274
Omar Abdul Rhman Salim, R. F. Olanrewaju, Wasiu Adebayo Balogun
We are living in a world where everything is automated and linked online. The internet of things, image processing, and machine learning are evolving day by day. Many systems have been completely changed due to this evolve to achieve more accurate results. The attendance system is a typicalexample of this transition, starting from the traditional signature on a paper sheet to face recognition. This paper proposes a method of developing a comprehensive embedded class attendance systemusing facial recognition with controlling the door access. The system is based on Raspberry Pi thatruns Raspbian (Linux) Operating System installed on micro SD card. The Raspberry Pi Camera, as well as a 5-inch screen, are connected to the Raspberry Pi. By facing the camera, the camera will capture the image then pass it to the Raspberry Pi which is programmed to handle the face recognition by implementing the Local Binary Patterns algorithm LBPs. If the student’s input image matches withthetrained dataset image the prototype door will open using Servo Motor, then the attendance results will be stored in the MySQL database. The database is connected to Attendance Management Syste(AMS) web server, which makes the attendance results reachable to any online connected web browser.The system has 95{% accuracy with the dataset of 11 person images.
{"title":"Class Attendance Management System Using Face Recognition","authors":"Omar Abdul Rhman Salim, R. F. Olanrewaju, Wasiu Adebayo Balogun","doi":"10.1109/ICCCE.2018.8539274","DOIUrl":"https://doi.org/10.1109/ICCCE.2018.8539274","url":null,"abstract":"We are living in a world where everything is automated and linked online. The internet of things, image processing, and machine learning are evolving day by day. Many systems have been completely changed due to this evolve to achieve more accurate results. The attendance system is a typicalexample of this transition, starting from the traditional signature on a paper sheet to face recognition. This paper proposes a method of developing a comprehensive embedded class attendance systemusing facial recognition with controlling the door access. The system is based on Raspberry Pi thatruns Raspbian (Linux) Operating System installed on micro SD card. The Raspberry Pi Camera, as well as a 5-inch screen, are connected to the Raspberry Pi. By facing the camera, the camera will capture the image then pass it to the Raspberry Pi which is programmed to handle the face recognition by implementing the Local Binary Patterns algorithm LBPs. If the student’s input image matches withthetrained dataset image the prototype door will open using Servo Motor, then the attendance results will be stored in the MySQL database. The database is connected to Attendance Management Syste(AMS) web server, which makes the attendance results reachable to any online connected web browser.The system has 95{% accuracy with the dataset of 11 person images.","PeriodicalId":260264,"journal":{"name":"2018 7th International Conference on Computer and Communication Engineering (ICCCE)","volume":"290 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121959490","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-01DOI: 10.1109/ICCCE.2018.8539300
M. Morshed, Ziyuan Li, B. Olbricht, L. Fu, Ahasanul Haque, Li Li, H. Hattori
In general, noble metals based nano-antennas cannot work at high power applications such as heat resisted magnetic recording, solar thermo-photovoltaics, and nano-scale heat transfer systems. These antennas are prone to being damaged at sufficiently high energy density due to their small footprint and low Tamman temperature. This paper proposes tungsten refractory plasmonic material based nano-antennas as an alternative gold nano-antennas: we show that the antennas can handle 300 times higher fluence than gold (Au) counterpart. In addition, it can achieve 7.22 higher magnitude of electric field intensity than gold antennas.
{"title":"Tungsten Refractory Plasmonic Material for High Fluence Bowtie Nano-antenna","authors":"M. Morshed, Ziyuan Li, B. Olbricht, L. Fu, Ahasanul Haque, Li Li, H. Hattori","doi":"10.1109/ICCCE.2018.8539300","DOIUrl":"https://doi.org/10.1109/ICCCE.2018.8539300","url":null,"abstract":"In general, noble metals based nano-antennas cannot work at high power applications such as heat resisted magnetic recording, solar thermo-photovoltaics, and nano-scale heat transfer systems. These antennas are prone to being damaged at sufficiently high energy density due to their small footprint and low Tamman temperature. This paper proposes tungsten refractory plasmonic material based nano-antennas as an alternative gold nano-antennas: we show that the antennas can handle 300 times higher fluence than gold (Au) counterpart. In addition, it can achieve 7.22 higher magnitude of electric field intensity than gold antennas.","PeriodicalId":260264,"journal":{"name":"2018 7th International Conference on Computer and Communication Engineering (ICCCE)","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127872473","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-01DOI: 10.1109/ICCCE.2018.8539243
C. K. A. C. Alam, F. Che Seman, A. Asrokin, N. Nohan
This paper we are actually investigating the impact of cable bleeding into RLCG twisted pair and achievable bit rate based on VDSL2 profiles (17a). The study has been done by carried out investigation on attenuation copper cable itself in ideal conditions and cable bleeding. S-parameter for ideal conditions with distances in 100m, 200m and 300m is obtained. Besides that, the copper cable 200m has been tested in non-ideal conditions when it is bleeding conditions defined by 0. 3cm lengths of bleed. It is observed that at 18MHz the attenuation is increases while the increases of cable distance. Then, from S- parameter results it can been analyzed into RLCG model which is can represents into lumped-element circuit and also the performances maximum achievable bit rate. It is found significant effect on the cable bleeding for 200m with it performances in attenuation and achievable bit rate compared to ideal conditions.
{"title":"Impact of Cable Bleeding into RLCG of Twisted Pair Copper Cable and Achievable Bit Rate","authors":"C. K. A. C. Alam, F. Che Seman, A. Asrokin, N. Nohan","doi":"10.1109/ICCCE.2018.8539243","DOIUrl":"https://doi.org/10.1109/ICCCE.2018.8539243","url":null,"abstract":"This paper we are actually investigating the impact of cable bleeding into RLCG twisted pair and achievable bit rate based on VDSL2 profiles (17a). The study has been done by carried out investigation on attenuation copper cable itself in ideal conditions and cable bleeding. S-parameter for ideal conditions with distances in 100m, 200m and 300m is obtained. Besides that, the copper cable 200m has been tested in non-ideal conditions when it is bleeding conditions defined by 0. 3cm lengths of bleed. It is observed that at 18MHz the attenuation is increases while the increases of cable distance. Then, from S- parameter results it can been analyzed into RLCG model which is can represents into lumped-element circuit and also the performances maximum achievable bit rate. It is found significant effect on the cable bleeding for 200m with it performances in attenuation and achievable bit rate compared to ideal conditions.","PeriodicalId":260264,"journal":{"name":"2018 7th International Conference on Computer and Communication Engineering (ICCCE)","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121227938","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-01DOI: 10.1109/ICCCE.2018.8539270
Alaa Haddad, S. Hameed
Skin disease is the most common disease in the world. The diagnosis of the skin disease requires a high level of expertise and accuracy for dermatologist, so computer aided skin disease diagnosis model is proposed to provide more objective and reliable solution. Many researches were done to help detect skin diseases like skin cancer and tumor skin. But the accurate recognition of the disease is extremely challenging due to the following reasons: low contrast between lesions and skin, visual similarity between Disease and non-Disease area, etc. This paper aims to detect skin disease from the skin image and to analyze this image by applying filter to remove noise or unwanted things, convert the image to grey to help in the processing and get the useful information. This help to give evidence for any type of skin disease and illustrate emergency orientation. Analysis result of this study can support doctor to help in initial diagnoses and to know the type of disease. That is compatible with skin and to avoid side effects.
{"title":"Image Analysis Model For Skin Disease Detection: Framework","authors":"Alaa Haddad, S. Hameed","doi":"10.1109/ICCCE.2018.8539270","DOIUrl":"https://doi.org/10.1109/ICCCE.2018.8539270","url":null,"abstract":"Skin disease is the most common disease in the world. The diagnosis of the skin disease requires a high level of expertise and accuracy for dermatologist, so computer aided skin disease diagnosis model is proposed to provide more objective and reliable solution. Many researches were done to help detect skin diseases like skin cancer and tumor skin. But the accurate recognition of the disease is extremely challenging due to the following reasons: low contrast between lesions and skin, visual similarity between Disease and non-Disease area, etc. This paper aims to detect skin disease from the skin image and to analyze this image by applying filter to remove noise or unwanted things, convert the image to grey to help in the processing and get the useful information. This help to give evidence for any type of skin disease and illustrate emergency orientation. Analysis result of this study can support doctor to help in initial diagnoses and to know the type of disease. That is compatible with skin and to avoid side effects.","PeriodicalId":260264,"journal":{"name":"2018 7th International Conference on Computer and Communication Engineering (ICCCE)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116850150","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：