The Knowledge Management concept is a method that will be used in research and allows an organization to manage its knowledge as an asset. In order to improve organizational performance, especially in the field of Higher Education (PT) services, various efforts are needed to channel correct and appropriate knowledge to PT managers, so that the implementation of activities can run as expected. This research uses a descriptive research method that systematically describes the facts, objects and subjects studied accurately. Knowledge is one form of achieving PT excellence, if the value of the knowledge created can be implemented by the PT. The idea to implement a knowledge management (KM) system model is to carry out a real reaction in the optimization efforts of Private PTs in increasing the student body at Satya Negara Indonesia University (USNI), which in fact is experiencing a degradation of prospective students. So that the implementation of Knowledge Management can run as expected, USNI needs to apply the general characteristics of its academics to the KM model by (a) Providing knowledge; (b) Carrying out academic activities; (c) carry out the Tri Dharma of Higher Education; and (d) Development of academic culture. This research aims to provide knowledge information in the form of a knowledge management model that must be implemented and carried out by USNI through changing mindsets through general characteristics in the development of lecturers as USNI resources in an effort to gradually increase the student body which ultimately results in superior learning products and education.
{"title":"Implementation of the Knowledge Management (KM) Model in Increasing Student Body in Private Universities","authors":"Prionggo Hendradi","doi":"10.34306/ajri.v6i1.1070","DOIUrl":"https://doi.org/10.34306/ajri.v6i1.1070","url":null,"abstract":"The Knowledge Management concept is a method that will be used in research and allows an organization to manage its knowledge as an asset. In order to improve organizational performance, especially in the field of Higher Education (PT) services, various efforts are needed to channel correct and appropriate knowledge to PT managers, so that the implementation of activities can run as expected. This research uses a descriptive research method that systematically describes the facts, objects and subjects studied accurately. Knowledge is one form of achieving PT excellence, if the value of the knowledge created can be implemented by the PT. The idea to implement a knowledge management (KM) system model is to carry out a real reaction in the optimization efforts of Private PTs in increasing the student body at Satya Negara Indonesia University (USNI), which in fact is experiencing a degradation of prospective students. So that the implementation of Knowledge Management can run as expected, USNI needs to apply the general characteristics of its academics to the KM model by (a) Providing knowledge; (b) Carrying out academic activities; (c) carry out the Tri Dharma of Higher Education; and (d) Development of academic culture. This research aims to provide knowledge information in the form of a knowledge management model that must be implemented and carried out by USNI through changing mindsets through general characteristics in the development of lecturers as USNI resources in an effort to gradually increase the student body which ultimately results in superior learning products and education.\u0000 ","PeriodicalId":348558,"journal":{"name":"ADI Journal on Recent Innovation (AJRI)","volume":" 29","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141129425","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Scouting is a crucial aspect of football, where the team's success depends heavily on the ability to select the right player. To minimize risk and optimize resources, teams can utilize the football scouting application. Unfortunately, existing applications still have limitations, especially in support of multiple platforms, and are open source. Therefore, this research is focused on developing a football scouting application that supports multiple platforms and is open source, using a single codebase-based Flutter Framework. Using Flutter, the app can be created based on just one code base, which can be compiled directly on Android and iOS platforms. The developed application has several superior features. First, the application allows the admin to insert player data into the database. Another feature is the ability to search for players based on names that users include. In addition, the application is also able to display a list of players based on the position chosen by the user. Finally, the application can display the complete data and statistics of the currently active player. Through the implementation of the selected development method, the implementation of this system can contribute significantly to supporting the scouting process in football teams. Thus, this application can increase the efficiency and effectiveness of decision-making within the scope of football scouting activities.
{"title":"Analysis and Development of a Football Scouting App based on Flutter: A Case Study of A3N","authors":"Andri Zefrinaldi, N. Selviandro, G. Wulandari","doi":"10.34306/ajri.v5i2.1051","DOIUrl":"https://doi.org/10.34306/ajri.v5i2.1051","url":null,"abstract":"Scouting is a crucial aspect of football, where the team's success depends heavily on the ability to select the right player. To minimize risk and optimize resources, teams can utilize the football scouting application. Unfortunately, existing applications still have limitations, especially in support of multiple platforms, and are open source. Therefore, this research is focused on developing a football scouting application that supports multiple platforms and is open source, using a single codebase-based Flutter Framework. Using Flutter, the app can be created based on just one code base, which can be compiled directly on Android and iOS platforms. The developed application has several superior features. First, the application allows the admin to insert player data into the database. Another feature is the ability to search for players based on names that users include. In addition, the application is also able to display a list of players based on the position chosen by the user. Finally, the application can display the complete data and statistics of the currently active player. Through the implementation of the selected development method, the implementation of this system can contribute significantly to supporting the scouting process in football teams. Thus, this application can increase the efficiency and effectiveness of decision-making within the scope of football scouting activities.","PeriodicalId":348558,"journal":{"name":"ADI Journal on Recent Innovation (AJRI)","volume":"97 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139803039","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In the implementation of the St. Batu Tulis – Lintas Bogor – Sukabumi STA 5+550 project, a significant challenge arose with the occurrence of an avalanche during construction, attributing landslides to substantial land subsidence caused by the destabilization of the slope's soil or rocks. This disruption significantly impacted construction planning, particularly in terms of cost considerations. This study conducted a comprehensive comparative analysis of the stability of the original embankment slope and slopes reinforced with gabions (measuring 2m x 1m x 0.5m), sheet piles (type W-400 A-1000), and bored piles (size D600). To evaluate the stability, it was imperative to determine the safety factor (SF) and slope deformation under applied loads. The Plaxis 8.6 program was employed for the analysis, incorporating all relevant soil parameter data. Safety factor values were calculated as 1.67 for the gabion-bored pile combination slope, 1.62 for the sheet pile-reinforced slope, and 1.63 for the bored pile-reinforced slope. Estimated costs for slope strengthening were as follows: IDR 3,525,789,199.92 for sheet piles, IDR 2,180,309,258.00 for bored pile-gabion combination, and IDR 6,689,603,822.00 for bored piles alone. The budget for slope reinforcement with gabions proved more economical by IDR 1,345,479,941.92 compared to sheet piles and IDR 4,509,294,564.00 compared to bored piles. The reinforcement type selection was based on a cost analysis, prioritizing lower expenses while ensuring construction feasibility. Gabions offer advantages such as economical prices, flexibility, and simple construction methods, but they have drawbacks, including susceptibility of galvanized coated wire to water conditions with high salt or acid content and requiring a wide area for construction due to their large size. Sheet pile reinforcement is resistant to corrosion, durable, and has good performance, but it is unsuitable for supporting very high soil due to the requirement of a large cross-sectional area and not suitable for use in rocky soils due to piling difficulties.
在实施 St. Batu Tulis - Lintas Bogor - Sukabumi STA 5+550 项目的过程中，施工期间发生的雪崩带来了巨大的挑战。这种破坏极大地影响了施工规划，特别是在成本考虑方面。本研究对原有堤坡和使用石笼（尺寸为 2m x 1m x 0.5m）、钢板桩（型号为 W-400 A-1000）和钻孔灌注桩（尺寸为 D600）加固的斜坡的稳定性进行了全面的比较分析。为评估稳定性，必须确定安全系数（SF）和外加荷载下的边坡变形。分析采用了 Plaxis 8.6 程序，其中包含所有相关的土壤参数数据。经计算，石笼-钻孔灌注桩组合边坡的安全系数值为 1.67，板桩加固边坡的安全系数值为 1.62，钻孔灌注桩加固边坡的安全系数值为 1.63。加固斜坡的估计费用如下板桩加固的费用为 3,525,789,199.92 印尼盾，钻孔灌注桩-石笼组合加固的费用为 2,180,309,258.00 印尼盾，钻孔灌注桩单独加固的费用为 6,689,603,822.00 印尼盾。事实证明，使用石笼加固边坡的预算比使用板桩加固边坡的预算节省 1,345,479,941.92 印尼盾，比使用钻孔灌注桩加固边坡的预算节省 4,509,294,564.00 印尼盾。加固类型的选择基于成本分析，在确保施工可行性的同时，优先考虑较低的成本。石笼网具有价格经济、灵活性强、施工方法简单等优点，但也有缺点，包括镀锌钢丝易受高盐或高酸水质条件的影响，以及因其体积大而需要大面积施工。钢板桩加固法耐腐蚀、耐用，性能良好，但由于需要较大的横截面积，不适合支撑很高的土壤，而且由于打桩困难，不适合在岩石土壤中使用。
{"title":"Landslide Management for Batu Tulis – Cross Bogor – Sukabumi Station Double Lane Project at STA 5+550","authors":"Budi Purnomo Setiawan, Muhammad Zaki","doi":"10.34306/ajri.v5i2.1052","DOIUrl":"https://doi.org/10.34306/ajri.v5i2.1052","url":null,"abstract":"In the implementation of the St. Batu Tulis – Lintas Bogor – Sukabumi STA 5+550 project, a significant challenge arose with the occurrence of an avalanche during construction, attributing landslides to substantial land subsidence caused by the destabilization of the slope's soil or rocks. This disruption significantly impacted construction planning, particularly in terms of cost considerations. This study conducted a comprehensive comparative analysis of the stability of the original embankment slope and slopes reinforced with gabions (measuring 2m x 1m x 0.5m), sheet piles (type W-400 A-1000), and bored piles (size D600). To evaluate the stability, it was imperative to determine the safety factor (SF) and slope deformation under applied loads. The Plaxis 8.6 program was employed for the analysis, incorporating all relevant soil parameter data. Safety factor values were calculated as 1.67 for the gabion-bored pile combination slope, 1.62 for the sheet pile-reinforced slope, and 1.63 for the bored pile-reinforced slope. Estimated costs for slope strengthening were as follows: IDR 3,525,789,199.92 for sheet piles, IDR 2,180,309,258.00 for bored pile-gabion combination, and IDR 6,689,603,822.00 for bored piles alone. The budget for slope reinforcement with gabions proved more economical by IDR 1,345,479,941.92 compared to sheet piles and IDR 4,509,294,564.00 compared to bored piles. The reinforcement type selection was based on a cost analysis, prioritizing lower expenses while ensuring construction feasibility. Gabions offer advantages such as economical prices, flexibility, and simple construction methods, but they have drawbacks, including susceptibility of galvanized coated wire to water conditions with high salt or acid content and requiring a wide area for construction due to their large size. Sheet pile reinforcement is resistant to corrosion, durable, and has good performance, but it is unsuitable for supporting very high soil due to the requirement of a large cross-sectional area and not suitable for use in rocky soils due to piling difficulties.","PeriodicalId":348558,"journal":{"name":"ADI Journal on Recent Innovation (AJRI)","volume":"58 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139803184","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Scouting is a crucial aspect of football, where the team's success depends heavily on the ability to select the right player. To minimize risk and optimize resources, teams can utilize the football scouting application. Unfortunately, existing applications still have limitations, especially in support of multiple platforms, and are open source. Therefore, this research is focused on developing a football scouting application that supports multiple platforms and is open source, using a single codebase-based Flutter Framework. Using Flutter, the app can be created based on just one code base, which can be compiled directly on Android and iOS platforms. The developed application has several superior features. First, the application allows the admin to insert player data into the database. Another feature is the ability to search for players based on names that users include. In addition, the application is also able to display a list of players based on the position chosen by the user. Finally, the application can display the complete data and statistics of the currently active player. Through the implementation of the selected development method, the implementation of this system can contribute significantly to supporting the scouting process in football teams. Thus, this application can increase the efficiency and effectiveness of decision-making within the scope of football scouting activities.
{"title":"Analysis and Development of a Football Scouting App based on Flutter: A Case Study of A3N","authors":"Andri Zefrinaldi, N. Selviandro, G. Wulandari","doi":"10.34306/ajri.v5i2.1051","DOIUrl":"https://doi.org/10.34306/ajri.v5i2.1051","url":null,"abstract":"Scouting is a crucial aspect of football, where the team's success depends heavily on the ability to select the right player. To minimize risk and optimize resources, teams can utilize the football scouting application. Unfortunately, existing applications still have limitations, especially in support of multiple platforms, and are open source. Therefore, this research is focused on developing a football scouting application that supports multiple platforms and is open source, using a single codebase-based Flutter Framework. Using Flutter, the app can be created based on just one code base, which can be compiled directly on Android and iOS platforms. The developed application has several superior features. First, the application allows the admin to insert player data into the database. Another feature is the ability to search for players based on names that users include. In addition, the application is also able to display a list of players based on the position chosen by the user. Finally, the application can display the complete data and statistics of the currently active player. Through the implementation of the selected development method, the implementation of this system can contribute significantly to supporting the scouting process in football teams. Thus, this application can increase the efficiency and effectiveness of decision-making within the scope of football scouting activities.","PeriodicalId":348558,"journal":{"name":"ADI Journal on Recent Innovation (AJRI)","volume":"133 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139862795","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In the implementation of the St. Batu Tulis – Lintas Bogor – Sukabumi STA 5+550 project, a significant challenge arose with the occurrence of an avalanche during construction, attributing landslides to substantial land subsidence caused by the destabilization of the slope's soil or rocks. This disruption significantly impacted construction planning, particularly in terms of cost considerations. This study conducted a comprehensive comparative analysis of the stability of the original embankment slope and slopes reinforced with gabions (measuring 2m x 1m x 0.5m), sheet piles (type W-400 A-1000), and bored piles (size D600). To evaluate the stability, it was imperative to determine the safety factor (SF) and slope deformation under applied loads. The Plaxis 8.6 program was employed for the analysis, incorporating all relevant soil parameter data. Safety factor values were calculated as 1.67 for the gabion-bored pile combination slope, 1.62 for the sheet pile-reinforced slope, and 1.63 for the bored pile-reinforced slope. Estimated costs for slope strengthening were as follows: IDR 3,525,789,199.92 for sheet piles, IDR 2,180,309,258.00 for bored pile-gabion combination, and IDR 6,689,603,822.00 for bored piles alone. The budget for slope reinforcement with gabions proved more economical by IDR 1,345,479,941.92 compared to sheet piles and IDR 4,509,294,564.00 compared to bored piles. The reinforcement type selection was based on a cost analysis, prioritizing lower expenses while ensuring construction feasibility. Gabions offer advantages such as economical prices, flexibility, and simple construction methods, but they have drawbacks, including susceptibility of galvanized coated wire to water conditions with high salt or acid content and requiring a wide area for construction due to their large size. Sheet pile reinforcement is resistant to corrosion, durable, and has good performance, but it is unsuitable for supporting very high soil due to the requirement of a large cross-sectional area and not suitable for use in rocky soils due to piling difficulties.
在实施 St. Batu Tulis - Lintas Bogor - Sukabumi STA 5+550 项目的过程中，施工期间发生的雪崩带来了巨大的挑战。这种破坏极大地影响了施工规划，特别是在成本考虑方面。本研究对原有堤坡和使用石笼（尺寸为 2m x 1m x 0.5m）、钢板桩（型号为 W-400 A-1000）和钻孔灌注桩（尺寸为 D600）加固的斜坡的稳定性进行了全面的比较分析。为评估稳定性，必须确定安全系数（SF）和外加荷载下的边坡变形。分析采用了 Plaxis 8.6 程序，其中包含所有相关的土壤参数数据。经计算，石笼-钻孔灌注桩组合边坡的安全系数值为 1.67，板桩加固边坡的安全系数值为 1.62，钻孔灌注桩加固边坡的安全系数值为 1.63。加固斜坡的估计费用如下板桩加固的费用为 3,525,789,199.92 印尼盾，钻孔灌注桩-石笼组合加固的费用为 2,180,309,258.00 印尼盾，钻孔灌注桩单独加固的费用为 6,689,603,822.00 印尼盾。事实证明，使用石笼加固边坡的预算比使用板桩加固边坡的预算节省 1,345,479,941.92 印尼盾，比使用钻孔灌注桩加固边坡的预算节省 4,509,294,564.00 印尼盾。加固类型的选择基于成本分析，在确保施工可行性的同时，优先考虑较低的成本。石笼网具有价格经济、灵活性强、施工方法简单等优点，但也有缺点，包括镀锌钢丝易受高盐或高酸水质条件的影响，以及因其体积大而需要大面积施工。钢板桩加固法耐腐蚀、耐用，性能良好，但由于需要较大的横截面积，不适合支撑很高的土壤，而且由于打桩困难，不适合在岩石土壤中使用。
{"title":"Landslide Management for Batu Tulis – Cross Bogor – Sukabumi Station Double Lane Project at STA 5+550","authors":"Budi Purnomo Setiawan, Muhammad Zaki","doi":"10.34306/ajri.v5i2.1052","DOIUrl":"https://doi.org/10.34306/ajri.v5i2.1052","url":null,"abstract":"In the implementation of the St. Batu Tulis – Lintas Bogor – Sukabumi STA 5+550 project, a significant challenge arose with the occurrence of an avalanche during construction, attributing landslides to substantial land subsidence caused by the destabilization of the slope's soil or rocks. This disruption significantly impacted construction planning, particularly in terms of cost considerations. This study conducted a comprehensive comparative analysis of the stability of the original embankment slope and slopes reinforced with gabions (measuring 2m x 1m x 0.5m), sheet piles (type W-400 A-1000), and bored piles (size D600). To evaluate the stability, it was imperative to determine the safety factor (SF) and slope deformation under applied loads. The Plaxis 8.6 program was employed for the analysis, incorporating all relevant soil parameter data. Safety factor values were calculated as 1.67 for the gabion-bored pile combination slope, 1.62 for the sheet pile-reinforced slope, and 1.63 for the bored pile-reinforced slope. Estimated costs for slope strengthening were as follows: IDR 3,525,789,199.92 for sheet piles, IDR 2,180,309,258.00 for bored pile-gabion combination, and IDR 6,689,603,822.00 for bored piles alone. The budget for slope reinforcement with gabions proved more economical by IDR 1,345,479,941.92 compared to sheet piles and IDR 4,509,294,564.00 compared to bored piles. The reinforcement type selection was based on a cost analysis, prioritizing lower expenses while ensuring construction feasibility. Gabions offer advantages such as economical prices, flexibility, and simple construction methods, but they have drawbacks, including susceptibility of galvanized coated wire to water conditions with high salt or acid content and requiring a wide area for construction due to their large size. Sheet pile reinforcement is resistant to corrosion, durable, and has good performance, but it is unsuitable for supporting very high soil due to the requirement of a large cross-sectional area and not suitable for use in rocky soils due to piling difficulties.","PeriodicalId":348558,"journal":{"name":"ADI Journal on Recent Innovation (AJRI)","volume":"106 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139863114","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The utilization of water resources encompasses activities related to providing water for human needs, one of which is irrigation water supply. In this research, optimization techniques are employed to optimize the availability of irrigation water in order to achieve maximum agricultural production and profit, as well as more effective and efficient irrigation utilization. The optimization technique used in this crop pattern optimization study employs linear programming through the use of the POM QM application. This study plans for 3 alternatives involving 2 different crops, namely corn and peanuts. Alternative 1 implements the cropping pattern for MT I in November, alternative 2 for MT I in November II, and alternative 3 for MT I in December I. Among the planned alternatives, the cropping pattern that yields maximum profit is alternative 3, which results in a rice cultivation area of 634.15 hectares for MT I, 15.22 hectares for MT II, 3.1 hectares for corn, and 7.5 hectares for peanuts. The achieved profit in one year is Rp 11,553,320,000 for the cropping pattern with corn and Rp 11,566,000,000 for the cropping pattern with peanuts.
{"title":"Optimization Study of Cropping Pattern in the Klakah Irrigation Area, Lumajang Regency, Using Linear Programming","authors":"Wahyu Sejati, Teungku Thareq Akbar","doi":"10.34306/ajri.v5i2.999","DOIUrl":"https://doi.org/10.34306/ajri.v5i2.999","url":null,"abstract":"The utilization of water resources encompasses activities related to providing water for human needs, one of which is irrigation water supply. In this research, optimization techniques are employed to optimize the availability of irrigation water in order to achieve maximum agricultural production and profit, as well as more effective and efficient irrigation utilization. The optimization technique used in this crop pattern optimization study employs linear programming through the use of the POM QM application. This study plans for 3 alternatives involving 2 different crops, namely corn and peanuts. Alternative 1 implements the cropping pattern for MT I in November, alternative 2 for MT I in November II, and alternative 3 for MT I in December I. Among the planned alternatives, the cropping pattern that yields maximum profit is alternative 3, which results in a rice cultivation area of 634.15 hectares for MT I, 15.22 hectares for MT II, 3.1 hectares for corn, and 7.5 hectares for peanuts. The achieved profit in one year is Rp 11,553,320,000 for the cropping pattern with corn and Rp 11,566,000,000 for the cropping pattern with peanuts.","PeriodicalId":348558,"journal":{"name":"ADI Journal on Recent Innovation (AJRI)","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139282322","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Utilizing IoT based on health services cannot be avoided, especially during a pandemic requiring a screening process for a person's condition. It serves as an important tool for conducting initial health assessments, which are critical in determining subsequent healthcare interventions. Healthcare-oriented IoT solutions offer a cost-effective approach to remote health evaluation, expanding their reach to remote and underserved areas. The implementation of Safe Entry Stations (SES) further enhances this process by capturing fundamental health metrics such as blood pressure, heart rate, and respiratory rate. This article delves into the exploration of the determinants that influence individuals' intentions to adopt health-focused IoT devices. This introduces a new Technology Acceptance Model (TAM) framework by including additional variables. These findings, as revealed through SmartPLS analysis, confirm the significant impact on the acceptance and integration of health-oriented IoT devices. This research underscores the important role of IoT technology in the healthcare sector and contributes relevant insights for its widespread adoption and implementation.
{"title":"Design of a TAM Framework with Emotional Variables in the Acceptance of Health-based IoT in Indonesia","authors":"Dendy Jonas, Evi Maria, Sutarto, Indrastanti Ratna Widiasari, Untung Rahardja, Theophilus Wellem","doi":"10.34306/ajri.v5i2.1005","DOIUrl":"https://doi.org/10.34306/ajri.v5i2.1005","url":null,"abstract":"Utilizing IoT based on health services cannot be avoided, especially during a pandemic requiring a screening process for a person's condition. It serves as an important tool for conducting initial health assessments, which are critical in determining subsequent healthcare interventions. Healthcare-oriented IoT solutions offer a cost-effective approach to remote health evaluation, expanding their reach to remote and underserved areas. The implementation of Safe Entry Stations (SES) further enhances this process by capturing fundamental health metrics such as blood pressure, heart rate, and respiratory rate. This article delves into the exploration of the determinants that influence individuals' intentions to adopt health-focused IoT devices. This introduces a new Technology Acceptance Model (TAM) framework by including additional variables. These findings, as revealed through SmartPLS analysis, confirm the significant impact on the acceptance and integration of health-oriented IoT devices. This research underscores the important role of IoT technology in the healthcare sector and contributes relevant insights for its widespread adoption and implementation.","PeriodicalId":348558,"journal":{"name":"ADI Journal on Recent Innovation (AJRI)","volume":"67 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139281728","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The emergence of environmental pollution problems in recent years has compelled the transportation sector to embrace environmentally friendly electric vehicles. Indonesia, being a significant market for both two-wheeled and four-wheeled vehicles, nevertheless experiences relatively low adoption of electric vehicles (EVs). This study aims to analyze the influence of attitudes, subjective norms, perceptions of behavioral control, moral norms, environmental awareness, financial incentive policies, and risk perceptions on the intention to adopt battery electric vehicles (BEVs). This research falls under the category of basic research, specifically quantitative in nature, involving the analysis of numerical data using statistical methods. Data for the study were collected through an online questionnaire using a non-probability purposive sampling design. The collected data were processed using SPSS 25 software and subjected to a Partial Least Square Test. The data analysis for this study utilized SmartPLS software version 3.2.7. Results based on a sample of 224 respondents suggest that attitudes and subjective norms do not significantly influence BEV adoption intentions. However, while perceived behavioral controls, moral norms, environmental concerns, and financial incentives have a positive and significant impact on willingness to adopt battery electric vehicles (BEVs), the perceived risks , has a negative and significant impact on BEV adoption intentions.
{"title":"Analysis of Factors Influencing Intention to Adopt Battery Electric Vehicle in Indonesia","authors":"Muhammad Candra Saputra, Erna Andajani","doi":"10.34306/ajri.v5i2.993","DOIUrl":"https://doi.org/10.34306/ajri.v5i2.993","url":null,"abstract":"The emergence of environmental pollution problems in recent years has compelled the transportation sector to embrace environmentally friendly electric vehicles. Indonesia, being a significant market for both two-wheeled and four-wheeled vehicles, nevertheless experiences relatively low adoption of electric vehicles (EVs). This study aims to analyze the influence of attitudes, subjective norms, perceptions of behavioral control, moral norms, environmental awareness, financial incentive policies, and risk perceptions on the intention to adopt battery electric vehicles (BEVs). This research falls under the category of basic research, specifically quantitative in nature, involving the analysis of numerical data using statistical methods. Data for the study were collected through an online questionnaire using a non-probability purposive sampling design. The collected data were processed using SPSS 25 software and subjected to a Partial Least Square Test. The data analysis for this study utilized SmartPLS software version 3.2.7. Results based on a sample of 224 respondents suggest that attitudes and subjective norms do not significantly influence BEV adoption intentions. However, while perceived behavioral controls, moral norms, environmental concerns, and financial incentives have a positive and significant impact on willingness to adopt battery electric vehicles (BEVs), the perceived risks , has a negative and significant impact on BEV adoption intentions.","PeriodicalId":348558,"journal":{"name":"ADI Journal on Recent Innovation (AJRI)","volume":"201 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133208930","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Construction cost estimation is a critical aspect of construction activities that requires in-depth attention. The cost estimation process, which relies on specifications and working drawings prepared by the project owner, should ensure efficient and accurate project execution with appropriate and measurable execution methods. However, in reality, as revealed in previous research, there are still weaknesses in considering nonconformances in specifications in selecting heavy equipment, determining optimal execution methods, and ensuring efficient workforce management, including work safety aspects. Therefore, it is important to choose an implementation method that suits the characteristics of the field to ensure that the resulting cost analysis is accurate and appropriate. In some cases, the Unit Price Analysis Method (AHSP), in some cases, still tends to be general in nature and has not fully taken into account the differences between the 2016 and 2022 AHSP, such as changes in the coefficients for labor, equipment and materials. The effect of this discrepancy is that the base unit price often does not reflect the actual situation at the project site, which can impact the accuracy of cost estimates. To overcome this challenge, more in-depth adjustments are needed in the AHSP method to ensure that construction cost estimates truly reflect actual field conditions. This step will enable the use of the AHSP method as a more relevant and accurate tool for predicting construction project costs, which will ultimately support more efficient and effective project management. Thus, industrial construction can maximize resource efficiency and reduce potential cost discrepancies in the field.
{"title":"STUDY OF WORK UNIT PRICE PERMEN PUPR NUMBER 28 OF 2016 WITH PERMEN PUPR NUMBER 1 YEAR 2022 IN JU 1 RIVER EXCAVATION WORK","authors":"Fakhri Kalbuadi, Bambang Endro Yuwono","doi":"10.34306/ajri.v5i1.991","DOIUrl":"https://doi.org/10.34306/ajri.v5i1.991","url":null,"abstract":"Construction cost estimation is a critical aspect of construction activities that requires in-depth attention. The cost estimation process, which relies on specifications and working drawings prepared by the project owner, should ensure efficient and accurate project execution with appropriate and measurable execution methods. However, in reality, as revealed in previous research, there are still weaknesses in considering nonconformances in specifications in selecting heavy equipment, determining optimal execution methods, and ensuring efficient workforce management, including work safety aspects. Therefore, it is important to choose an implementation method that suits the characteristics of the field to ensure that the resulting cost analysis is accurate and appropriate. In some cases, the Unit Price Analysis Method (AHSP), in some cases, still tends to be general in nature and has not fully taken into account the differences between the 2016 and 2022 AHSP, such as changes in the coefficients for labor, equipment and materials. The effect of this discrepancy is that the base unit price often does not reflect the actual situation at the project site, which can impact the accuracy of cost estimates. To overcome this challenge, more in-depth adjustments are needed in the AHSP method to ensure that construction cost estimates truly reflect actual field conditions. This step will enable the use of the AHSP method as a more relevant and accurate tool for predicting construction project costs, which will ultimately support more efficient and effective project management. Thus, industrial construction can maximize resource efficiency and reduce potential cost discrepancies in the field.","PeriodicalId":348558,"journal":{"name":"ADI Journal on Recent Innovation (AJRI)","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122127765","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-09-01DOI: 10.34306/ajri.v5i1sp.998
Dewi Iriani, Suhadi Parman, Achmad Fa’iq Hafizh, Ine Rachmawati, Yuni Awalturrohmah Solihah
Catur Insan Cendekia University (UCIC) is a university located in Cirebon. Compared to other universities in Cirebon that were already established first, UCIC still has low brand awareness mainly among the high school student. To improve it, a lot of promotion activities has been done especially before and after high school graduation. Thanks to those activities, the amount of new students increased. But, UCIC still needs a new strategy for promotion which is better and can boost brand awareness. This research will design ambient advertisement as additional promotion media. Ambient media is chosen because it is unique and can use media or places which are close to the target audience. This strategy also hasn’t been done by the other universities. This ambient advertisement will take inspiration from “Digital Network Connection'', which will show how this college can make the students connected to each other.
Catur Insan Cendekia University (UCIC)是一所位于锡雷波尼的大学。UCIC的品牌认知度仍然较低，主要是在高中生中。为了提高这一水平，学校开展了大量的推广活动，特别是在高中毕业前后。由于这些活动，新生的数量增加了。但是，UCIC仍然需要一个新的推广策略，更好地提高品牌知名度。本研究将设计环境广告作为附加的推广媒介。选择环境媒体是因为它是独特的，可以使用接近目标受众的媒体或场所。其他大学也没有这样做过。这个环境广告的灵感来自于“数字网络连接”，它将展示这所学院如何让学生彼此联系起来。
{"title":"Ambient Media Advertisement of Catur Insan Cendekia University to Improve Brand Awareness","authors":"Dewi Iriani, Suhadi Parman, Achmad Fa’iq Hafizh, Ine Rachmawati, Yuni Awalturrohmah Solihah","doi":"10.34306/ajri.v5i1sp.998","DOIUrl":"https://doi.org/10.34306/ajri.v5i1sp.998","url":null,"abstract":"Catur Insan Cendekia University (UCIC) is a university located in Cirebon. Compared to other universities in Cirebon that were already established first, UCIC still has low brand awareness mainly among the high school student. To improve it, a lot of promotion activities has been done especially before and after high school graduation. Thanks to those activities, the amount of new students increased. But, UCIC still needs a new strategy for promotion which is better and can boost brand awareness. This research will design ambient advertisement as additional promotion media. Ambient media is chosen because it is unique and can use media or places which are close to the target audience. This strategy also hasn’t been done by the other universities. This ambient advertisement will take inspiration from “Digital Network Connection'', which will show how this college can make the students connected to each other.","PeriodicalId":348558,"journal":{"name":"ADI Journal on Recent Innovation (AJRI)","volume":"140 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116520239","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：