首页 > 最新文献
paperpass

JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING最新文献

英文 中文
Oceanographic Parameter Measurement System Based on LoRA Communication Module 基于 LoRA 通信模块的海洋参数测量系统
Pub Date : 2024-01-31 DOI: 10.31289/jite.v7i2.10855
Ashadi Amir, Untung Suwardoyo, Irninthya Nanda Pratami Irwan
Measurement of oceanographic parameters is needed to determine the condition of the ecosystem in the water area so that it can be the basis for carrying out conservation activities in marine waters. Measurement of physical and chemical parameters used manually which causes the data obtained is still susceptible to observational errors. In this study, a system was designed that can measure oceanographic parameters periodically. The designed system consists of a temperature sensor, turbidity sensor, pH sensor and TDS sensor integrated with a microcontroller device. The system consists of two main parts, a sensor node that has a function as a transmitter and a gateway that has a function as a receiver. Initial testing is done by calibrating and validating data for each sensor used. The next test was carried out by testing the transmission of data from the measurement of oceanographic parameters in the form of water pH, salinity, water temperature and water turbidity from the sensor node to the gateway using the LoRA Ebyte E220 communication module. The test results show that the sensor node measurement data can be sent to the gateway by setting the distance between devices as far as 500 meters. The resulting data transmission delay is in the range of 2-10 seconds
需要测量海洋学参数来确定水域生态系统的状况,以便为开展海洋水域保护活动提供依据。物理和化学参数的测量采用人工方式,因此获得的数据仍容易受到观测误差的影响。本研究设计了一套可定期测量海洋参数的系统。所设计的系统由温度传感器、浊度传感器、pH 传感器和 TDS 传感器组成,并与微控制器装置集成。系统由两个主要部分组成,一个是具有发射功能的传感器节点,另一个是具有接收功能的网关。初始测试是通过校准和验证每个传感器的数据来完成的。接下来的测试是利用 LoRA Ebyte E220 通信模块,测试从传感器节点向网关传输海洋参数测量数据的情况,这些参数包括水的 pH 值、盐度、水温和水的浊度。测试结果表明,将设备之间的距离设定为 500 米,传感器节点的测量数据就可以发送到网关。由此产生的数据传输延迟在 2-10 秒之间。
{"title":"Oceanographic Parameter Measurement System Based on LoRA Communication Module","authors":"Ashadi Amir, Untung Suwardoyo, Irninthya Nanda Pratami Irwan","doi":"10.31289/jite.v7i2.10855","DOIUrl":"https://doi.org/10.31289/jite.v7i2.10855","url":null,"abstract":"Measurement of oceanographic parameters is needed to determine the condition of the ecosystem in the water area so that it can be the basis for carrying out conservation activities in marine waters. Measurement of physical and chemical parameters used manually which causes the data obtained is still susceptible to observational errors. In this study, a system was designed that can measure oceanographic parameters periodically. The designed system consists of a temperature sensor, turbidity sensor, pH sensor and TDS sensor integrated with a microcontroller device. The system consists of two main parts, a sensor node that has a function as a transmitter and a gateway that has a function as a receiver. Initial testing is done by calibrating and validating data for each sensor used. The next test was carried out by testing the transmission of data from the measurement of oceanographic parameters in the form of water pH, salinity, water temperature and water turbidity from the sensor node to the gateway using the LoRA Ebyte E220 communication module. The test results show that the sensor node measurement data can be sent to the gateway by setting the distance between devices as far as 500 meters. The resulting data transmission delay is in the range of 2-10 seconds","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"396 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140473245","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Performance Analysis Of The Combination Of Blum Blum Shub And Rc5 Algorithm In Message Security 布卢姆-布卢姆-舒布算法和 Rc5 算法组合在信息安全中的性能分析
Pub Date : 2024-01-31 DOI: 10.31289/jite.v7i2.10937
Basyit Mubarroq Rambe, E. Nababan, M. K. Nasution
This research aims to enhance message security in the RC5 algorithm by integrating it with the Blum Blum Shub (BBS) algorithm. The rapid growth in data and information exchange, driven by advancements in information and communication technology, demands robust security against attacks such as eavesdropping, interruption, and data modification. Cryptography, particularly with symmetric and asymmetric keys, becomes a solution to maintain message confidentiality. The RC (Rivest Cipher) algorithm, specifically RC5, has become a popular choice in network applications due to its speed and variable key length complexity. This study attempts to improve the quality of encryption keys by integrating the Blum Blum Shub (BBS) method, a mathematical random number generator algorithm. RC5 and BBS are used together to secure messages, producing ciphertext that is difficult to predict and smaller in file size compared to the standard RC5 method. The test results show that the processing speed is independent of the number of characters in the plaintext, while the encrypted file size resulting from the RC5-BBS combination is more efficient than using the default RC5. In conclusion, integrating BBS into RC5 can enhance the security and efficiency of the encryption algorithm, with the potential for widespread application in cryptography-based data security
这项研究旨在通过将 RC5 算法与 Blum Blum Shub (BBS) 算法相结合,提高信息的安全性。信息和通信技术的发展推动了数据和信息交换的快速增长,这就要求提供强大的安全防护,以防止窃听、中断和数据修改等攻击。密码学,尤其是对称和非对称密钥,成为维护信息机密性的一种解决方案。RC(Rivest 密码)算法,特别是 RC5,因其速度快、密钥长度复杂度可变而成为网络应用中的热门选择。本研究试图通过整合 Blum Blum Shub(BBS)方法(一种数学随机数生成器算法)来提高加密密钥的质量。与标准 RC5 方法相比,RC5 和 BBS 共同用于保护信息,产生的密文难以预测,文件大小也更小。测试结果表明,处理速度与明文字符数无关,而 RC5-BBS 组合产生的加密文件大小比使用默认 RC5 更有效。总之,将 BBS 集成到 RC5 中可以提高加密算法的安全性和效率,有望在基于密码学的数据安全领域得到广泛应用。
{"title":"Performance Analysis Of The Combination Of Blum Blum Shub And Rc5 Algorithm In Message Security","authors":"Basyit Mubarroq Rambe, E. Nababan, M. K. Nasution","doi":"10.31289/jite.v7i2.10937","DOIUrl":"https://doi.org/10.31289/jite.v7i2.10937","url":null,"abstract":"This research aims to enhance message security in the RC5 algorithm by integrating it with the Blum Blum Shub (BBS) algorithm. The rapid growth in data and information exchange, driven by advancements in information and communication technology, demands robust security against attacks such as eavesdropping, interruption, and data modification. Cryptography, particularly with symmetric and asymmetric keys, becomes a solution to maintain message confidentiality. The RC (Rivest Cipher) algorithm, specifically RC5, has become a popular choice in network applications due to its speed and variable key length complexity. This study attempts to improve the quality of encryption keys by integrating the Blum Blum Shub (BBS) method, a mathematical random number generator algorithm. RC5 and BBS are used together to secure messages, producing ciphertext that is difficult to predict and smaller in file size compared to the standard RC5 method. The test results show that the processing speed is independent of the number of characters in the plaintext, while the encrypted file size resulting from the RC5-BBS combination is more efficient than using the default RC5. In conclusion, integrating BBS into RC5 can enhance the security and efficiency of the encryption algorithm, with the potential for widespread application in cryptography-based data security","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"403 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140477001","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Analysis Of The Effectiveness Of Using Learning Media During The Covid-19 Period With The Multi-Attribute Utility Theory 用多属性效用理论分析在 Covid-19 期间使用学习媒体的效果
Pub Date : 2024-01-31 DOI: 10.31289/jite.v7i2.10824
Nouval Irfan Faruqi, Idria Maita, Tengku Khairil Ahsyar, Mona Fronita
Learning activities during the Covid-19 pandemic were carried out online with the aim of taking advantage of technological advances using online learning media. All high schools have implemented online learning, one of which is SMAN 1 Bukit Batu. This aims to ensure that the learning process is carried out remotely without having to meet in person. Online learning has advantages and disadvantages that can affect the achievement of learning objectives, especially in theoretical and practical PKOK subjects. So it is necessary to assess learning theory and practice of PJOK to determine the effectiveness of both. Research the use of 6 criteria and compare theoretical and practical PJOK learning models to determine the best model. The method used is Multi-Attribute Utility Theory (MAUT) with a quantitative approach where data collection is carried out through surveys. There were 193 respondents, namely all 12th grade students of SMAN 1 Bukit Batu as the population in this study. The results of calculations using the MAUT method on the effectiveness of using online learning media during the Covid-19 pandemic resulted in the choice of the Theory subject assessment (0) as the lowest assessment, while the Practice subject (0.32) was the highest assessment. This assessment states that online learning can be said to be effective for practical subjects, while theoretical subjects are more effective if done offline
Covid-19 大流行期间的学习活动是在网上进行的,目的是利用网上学习媒体,发挥技术进步的优势。所有高中都实施了在线学习,SMAN 1 Bukit Batu 就是其中之一。这样做的目的是确保学习过程是远程进行的,而无需面谈。在线学习有利有弊,会影响学习目标的实现,尤其是在理论和实践PKOK科目方面。因此,有必要对 PJOK 的学习理论和实践进行评估,以确定两者的有效性。研究使用 6 项标准,比较理论和实践的 PJOK 学习模式,以确定最佳模式。使用的方法是多属性效用理论(MAUT),采用定量方法,通过调查收集数据。本研究的调查对象为 193 名受访者,即 SMAN 1 Bukit Batu 的所有 12 年级学生。使用 MAUT 方法对 Covid-19 大流行期间使用在线学习媒体的有效性进行计算的结果显示,选择理论科目的评估(0)为最低评估,而选择实践科目的评估(0.32)为最高评估。这一评估结果表明,在线学习对实践科目可以说是有效的,而理论科目如果离线学习则更有效。
{"title":"Analysis Of The Effectiveness Of Using Learning Media During The Covid-19 Period With The Multi-Attribute Utility Theory","authors":"Nouval Irfan Faruqi, Idria Maita, Tengku Khairil Ahsyar, Mona Fronita","doi":"10.31289/jite.v7i2.10824","DOIUrl":"https://doi.org/10.31289/jite.v7i2.10824","url":null,"abstract":"Learning activities during the Covid-19 pandemic were carried out online with the aim of taking advantage of technological advances using online learning media. All high schools have implemented online learning, one of which is SMAN 1 Bukit Batu. This aims to ensure that the learning process is carried out remotely without having to meet in person. Online learning has advantages and disadvantages that can affect the achievement of learning objectives, especially in theoretical and practical PKOK subjects. So it is necessary to assess learning theory and practice of PJOK to determine the effectiveness of both. Research the use of 6 criteria and compare theoretical and practical PJOK learning models to determine the best model. The method used is Multi-Attribute Utility Theory (MAUT) with a quantitative approach where data collection is carried out through surveys. There were 193 respondents, namely all 12th grade students of SMAN 1 Bukit Batu as the population in this study. The results of calculations using the MAUT method on the effectiveness of using online learning media during the Covid-19 pandemic resulted in the choice of the Theory subject assessment (0) as the lowest assessment, while the Practice subject (0.32) was the highest assessment. This assessment states that online learning can be said to be effective for practical subjects, while theoretical subjects are more effective if done offline","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"379 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140471173","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Sentiment Analysis Classification Of Political Parties On Twitter Using Gated Recurrent Unit Algorithm And Natural Language Processing 使用门控循环单元算法和自然语言处理对 Twitter 上的政党进行情感分析分类
Pub Date : 2024-01-31 DOI: 10.31289/jite.v7i2.10709
Ahmad Rizky Andriawan, M. Mustakim, Rice Novita
General elections cannot be separated from the issue of political parties. The issue can be in the form of surveys to sentiment. The results of the current survey need to be done in-depth validation related to the truth. Sentiment analysis aims to validate the truth of the survey institution. There are 5 political parties used as datasets in this study, namely Partai Demokrasi Indonesia Perjuangan Party (PDIP), Gerakan Indonesia Raya Party (Gerindra), Golongan Karya Party (Golkar), Partai Kebangkitan Bangsa Party (PKB), and Nasional Demokrat Party (Nasdem). The Gated Recurrent Unit (GRU) algorithm is implemented in this research as an experiment in data calculation. Based on the results of the GRU algorithm calculation in calculating sentiment on political parties, it produces the highest data at 56.50% accuracy, 72.76% precision, and 100% recall
大选离不开政党问题。这个问题可以通过调查的形式来感知。目前的调查结果需要做与真相相关的深入验证。情感分析旨在验证调查机构的真实性。本研究中使用了 5 个政党作为数据集,即印尼每庄安民主党(PDIP)、印尼拉雅党(Gerindra)、加里亚党(Golkar)、班沙党(PKB)和民族民主党(Nasional Demokrat Party)。作为数据计算实验,本研究采用了门控循环单元(GRU)算法。根据 GRU 算法计算政党情感的结果,其准确率为 56.50%,精确率为 72.76%,召回率为 100%,是准确率最高的数据。
{"title":"Sentiment Analysis Classification Of Political Parties On Twitter Using Gated Recurrent Unit Algorithm And Natural Language Processing","authors":"Ahmad Rizky Andriawan, M. Mustakim, Rice Novita","doi":"10.31289/jite.v7i2.10709","DOIUrl":"https://doi.org/10.31289/jite.v7i2.10709","url":null,"abstract":"General elections cannot be separated from the issue of political parties. The issue can be in the form of surveys to sentiment. The results of the current survey need to be done in-depth validation related to the truth. Sentiment analysis aims to validate the truth of the survey institution. There are 5 political parties used as datasets in this study, namely Partai Demokrasi Indonesia Perjuangan Party (PDIP), Gerakan Indonesia Raya Party (Gerindra), Golongan Karya Party (Golkar), Partai Kebangkitan Bangsa Party (PKB), and Nasional Demokrat Party (Nasdem). The Gated Recurrent Unit (GRU) algorithm is implemented in this research as an experiment in data calculation. Based on the results of the GRU algorithm calculation in calculating sentiment on political parties, it produces the highest data at 56.50% accuracy, 72.76% precision, and 100% recall","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"277 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140472730","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Analysis of the Level of Satisfaction with the Quality of Clinical Services Using the Servqual Method 利用服务质量法分析对临床服务质量的满意程度
Pub Date : 2024-01-31 DOI: 10.31289/jite.v7i2.11171
Ali Ibrahim, Lesa Fitriani, Endang Lestari Ruskan, Putri Eka Sevtiyuni, Pacu Putra Suarli
The influence of the globalization era has increased the use of health facilities in society. This increase requires agencies to provide the best possible service to customers. UPT. The Sriwijaya University Health Clinic as one of the providers of health facilities has also experienced the impact of this increase, therefore this agency continues to provide the best service and makes improvements in the services provided so that service users can feel satisfied. The aim of this research is to determine the level of student satisfaction with services at UPT. Sriwijaya University Health Clinic and which dimensions of service quality have a dominant influence on student satisfaction levels. This research involved 117 respondents from all students and was distributed via Google form with a quantitative research type and survey approach. Data analysis techniques were carried out using SPSS 26 and calculations were carried out using the servqual method. The research results show that from the total, the level of student satisfaction is at a percentage of 87% in the very satisfied category and the quality dimension that has a dominant influence is the reliability dimension with a Gap value of -1.17. With Cartesian diagram analysis, the question instruments included in quadrant I and quadrant II have the opportunity to be improved and maintained in quality so that they can get better responses in the future. With this research, it can be taken into consideration by UPT. Sriwijaya University Health Clinic to improve the quality of services provided in every dimension, especially those included in the important category and maintain the quality of services that previously received a good response
全球化时代的影响增加了社会对医疗设施的使用。这种增长要求医疗机构为客户提供尽可能最好的服务。UPT.Sriwijaya 大学保健诊所作为保健设施的提供者之一,也经历了这种增长所带来的影响,因此该机构将继续提供最好的服务,并对所提供的服务进行改进,以使服务使用者感到满意。本研究的目的在于确定学生对斯里兰卡理工大学服务的满意度。斯里维加亚大学卫生所的学生满意度,以及服务质量的哪些方面对学生满意度有主要影响。本研究涉及 117 名来自全体学生的受访者,通过谷歌表格以定量研究类型和调查方法进行分发。数据分析技术采用 SPSS 26,计算采用 servqual 法。研究结果表明,从总数来看,学生满意度为 87%,属于 "非常满意 "的范畴,而对学生满意度影响最大的质量维度是可靠性维度,其 Gap 值为-1.17。通过直角坐标图分析,第一象限和第二象限中的问题工具有机会在质量上得到改进和保持,从而在未来得到更好的回应。斯里维加亚大学卫生所可以借鉴这项研究。斯里维加亚大学卫生所应考虑提高各方面的服务质量,尤其是重要类别的服务质量,并保持以前获得良好回应的服务质量。
{"title":"Analysis of the Level of Satisfaction with the Quality of Clinical Services Using the Servqual Method","authors":"Ali Ibrahim, Lesa Fitriani, Endang Lestari Ruskan, Putri Eka Sevtiyuni, Pacu Putra Suarli","doi":"10.31289/jite.v7i2.11171","DOIUrl":"https://doi.org/10.31289/jite.v7i2.11171","url":null,"abstract":"The influence of the globalization era has increased the use of health facilities in society. This increase requires agencies to provide the best possible service to customers. UPT. The Sriwijaya University Health Clinic as one of the providers of health facilities has also experienced the impact of this increase, therefore this agency continues to provide the best service and makes improvements in the services provided so that service users can feel satisfied. The aim of this research is to determine the level of student satisfaction with services at UPT. Sriwijaya University Health Clinic and which dimensions of service quality have a dominant influence on student satisfaction levels. This research involved 117 respondents from all students and was distributed via Google form with a quantitative research type and survey approach. Data analysis techniques were carried out using SPSS 26 and calculations were carried out using the servqual method. The research results show that from the total, the level of student satisfaction is at a percentage of 87% in the very satisfied category and the quality dimension that has a dominant influence is the reliability dimension with a Gap value of -1.17. With Cartesian diagram analysis, the question instruments included in quadrant I and quadrant II have the opportunity to be improved and maintained in quality so that they can get better responses in the future. With this research, it can be taken into consideration by UPT. Sriwijaya University Health Clinic to improve the quality of services provided in every dimension, especially those included in the important category and maintain the quality of services that previously received a good response","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"426 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140474887","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Performance Analysis of 4x4 MIMO and 8x8 MIMO Antena Implementation of Private 5G Networks in Industrial Area 工业区专用 5G 网络的 4x4 MIMO 和 8x8 MIMO 天线实施性能分析
Pub Date : 2024-01-31 DOI: 10.31289/jite.v7i2.10440
Asri Wulandari, Toto Supriyanto, Akita Hasna, Raviadin N N, A. Hikmaturokhman
Private 5G represents a promising wireless network technology that offers a wide range of opportunities for mobile operators. It enables them to meet the increasing data demands of their customers and provide enhanced capacities and user experiences. However, before deploying Private 5G, it's crucial to prepare the foundation properly, especially when choosing the right antena and Radio Frequency (RF) band. This research project focuses on evaluating the implementation of 4x4 MIMO and 8x8 MIMO antenas in the Greater Jakarta industrial area, covering a 35 km2 area, operating at a frequency of 2300 MHz with a 40 MHz bandwidth. The study involved data rate measurements and determined the number of required sites based on different modulation schemes. The findings revealed that using an 8x8 MIMO antena resulted in a data rate twice as high as that achieved with a 4x4 MIMO antena and required only a quarter of the sites. Additionally, simulation results demonstrated that the 8x8 MIMO antena provided better SS-RSRP and SS-SINR values compared to the 4x4 MIMO antena, with values of -91.51 dBm and 8.52 dB
专用 5G 是一种前景广阔的无线网络技术,为移动运营商提供了广泛的机遇。它使运营商能够满足客户日益增长的数据需求,并提供更高的容量和用户体验。然而,在部署专用 5G 之前,做好基础准备至关重要,尤其是在选择合适的天线和射频 (RF) 频段时。本研究项目的重点是评估 4x4 MIMO 和 8x8 MIMO 天线在大雅加达工业区的实施情况,覆盖面积为 35 平方公里,工作频率为 2300 兆赫,带宽为 40 兆赫。研究涉及数据传输率测量,并根据不同的调制方案确定了所需站点的数量。研究结果表明,使用 8x8 MIMO 天线的数据传输率是使用 4x4 MIMO 天线的两倍,而所需站点数量仅为 4x4 MIMO 天线的四分之一。此外,模拟结果表明,与 4x4 MIMO 天线相比,8x8 MIMO 天线提供了更好的 SS-RSRP 和 SS-SINR 值,分别为 -91.51 dBm 和 8.52 dB。
{"title":"Performance Analysis of 4x4 MIMO and 8x8 MIMO Antena Implementation of Private 5G Networks in Industrial Area","authors":"Asri Wulandari, Toto Supriyanto, Akita Hasna, Raviadin N N, A. Hikmaturokhman","doi":"10.31289/jite.v7i2.10440","DOIUrl":"https://doi.org/10.31289/jite.v7i2.10440","url":null,"abstract":"Private 5G represents a promising wireless network technology that offers a wide range of opportunities for mobile operators. It enables them to meet the increasing data demands of their customers and provide enhanced capacities and user experiences. However, before deploying Private 5G, it's crucial to prepare the foundation properly, especially when choosing the right antena and Radio Frequency (RF) band. This research project focuses on evaluating the implementation of 4x4 MIMO and 8x8 MIMO antenas in the Greater Jakarta industrial area, covering a 35 km2 area, operating at a frequency of 2300 MHz with a 40 MHz bandwidth. The study involved data rate measurements and determined the number of required sites based on different modulation schemes. The findings revealed that using an 8x8 MIMO antena resulted in a data rate twice as high as that achieved with a 4x4 MIMO antena and required only a quarter of the sites. Additionally, simulation results demonstrated that the 8x8 MIMO antena provided better SS-RSRP and SS-SINR values compared to the 4x4 MIMO antena, with values of -91.51 dBm and 8.52 dB","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"124 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140476870","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Combination of Image Enhancement and U-Net Architecture for Cervical Cell Semantic Segmentation 结合图像增强和 U-Net 架构进行宫颈细胞语义分割
Pub Date : 2024-01-31 DOI: 10.31289/jite.v7i2.10399
Rudiansyah Rudiansyah, Lemi Iryani, Lucky Indra Kesuma, Puspa Sari, Agung Alamsyah
Cervical cancer is the second leading cause of death in women and ranks fourth as a disease that occurs in women worldwide. Cervical cancer is a disease that is difficult to detect and can be detected when it is in an advanced stage. This requires early prevention by carrying out a pap-smear examination. Pap-smear examination manually requires a relatively long time, so a tool is needed by segmentation. Segmentation is image processing by performing perfection between the intended object and the background. One of the CNN methods commonly used in medical image segmentation is the U-Net architecture. Segmentation in this study was carried out on the nucleus and cytoplasm of the Herlev dataset using the U-Net architecture combined with data augmentation and image enhancement. In the learning process, this research resulted in a fairly high IoU value of 78% and an RMSE close to 20%. The results of this study also yielded an accuracy value of 89%, with an average precision, recall and F1 score of 89%, 89% and 88.67%, respectively. This shows that the combination of the CNN U-Net architecture with image quality improvement and data augmentation is quite good at segmenting cervical cells for the nucleus and cytoplasm
宫颈癌是导致妇女死亡的第二大原因,在全球妇女疾病中排名第四。宫颈癌是一种很难发现的疾病,只有在晚期才能被发现。这就需要通过宫颈涂片检查进行早期预防。人工进行子宫颈抹片检查需要较长的时间,因此需要一种工具来进行分割。分割是通过对目标对象和背景进行完善的图像处理。U-Net 架构是医学图像分割中常用的 CNN 方法之一。本研究使用 U-Net 架构,结合数据增强和图像增强,对 Herlev 数据集的细胞核和细胞质进行了分割。在学习过程中,这项研究取得了相当高的 IoU 值(78%)和接近 20% 的 RMSE 值。这项研究的结果还得出了 89% 的准确度值,平均精确度、召回率和 F1 分数分别为 89%、89% 和 88.67%。这表明,CNN U-Net 架构与图像质量改进和数据增强相结合,能很好地分割宫颈细胞的细胞核和细胞质。
{"title":"Combination of Image Enhancement and U-Net Architecture for Cervical Cell Semantic Segmentation","authors":"Rudiansyah Rudiansyah, Lemi Iryani, Lucky Indra Kesuma, Puspa Sari, Agung Alamsyah","doi":"10.31289/jite.v7i2.10399","DOIUrl":"https://doi.org/10.31289/jite.v7i2.10399","url":null,"abstract":"Cervical cancer is the second leading cause of death in women and ranks fourth as a disease that occurs in women worldwide. Cervical cancer is a disease that is difficult to detect and can be detected when it is in an advanced stage. This requires early prevention by carrying out a pap-smear examination. Pap-smear examination manually requires a relatively long time, so a tool is needed by segmentation. Segmentation is image processing by performing perfection between the intended object and the background. One of the CNN methods commonly used in medical image segmentation is the U-Net architecture. Segmentation in this study was carried out on the nucleus and cytoplasm of the Herlev dataset using the U-Net architecture combined with data augmentation and image enhancement. In the learning process, this research resulted in a fairly high IoU value of 78% and an RMSE close to 20%. The results of this study also yielded an accuracy value of 89%, with an average precision, recall and F1 score of 89%, 89% and 88.67%, respectively. This shows that the combination of the CNN U-Net architecture with image quality improvement and data augmentation is quite good at segmenting cervical cells for the nucleus and cytoplasm","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"533 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140474223","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Utilization of Spiking Neural Network (SNN) in X-Ray Image for Lung Disease Detection 在 X 光图像中利用尖峰神经网络 (SNN) 检测肺部疾病
Pub Date : 2024-01-31 DOI: 10.31289/jite.v7i2.10671
Diah Rahayu Ningtias, Mohammad Rofi’i, B. A. Pramudita
The large number of cases of lung disease means that doctors have difficulty in making initial diagnoses, making them prone to misdiagnoses. One type of lung disease that is included in the vulnerable category is pneumonia. Early detection of the condition of the lungs affected by bacterial pneumonia can be carried out by screening using the X-Ray examination modality, namely Digital Radiography (DR). However, in practice, the diagnosis process on Citra DR takes a long time because it requires competent medical personnel (specialists). A system is needed that can help medical personnel to speed up the process of diagnosing lung disease and get accurate results so that misdiagnosis does not occur. The aim of this research is to utilize the Spiking Neural Network (SNN) method for classifying lung disease from DR images. The system was created using MATLAB with the initial step of creating a read data program, namely reading DR image secondary data in .jpg format taken from Kaggle.com. This research uses DR image data totaling 200 images. Next, standardize the size to 50 x 50 pixels. Then segmenting the image divides the gray level histogram into two different parts of the image automatically without requiring user assistance to enter threshold values ​​for normal and pneumonia images. Then convert the image to 1 dimension and create a manual program for the training data using 50 normal images and 50 pneumonia images. Lastly, create a program to test the data using 100 normal images and 100 pneumonia images. Based on the results of data testing, a confusion matrix was obtained from 200 images with sensitivity of 87%, specificity of 69%, precision of 73.7288%, recall of 69%, and accuracy of 78%
由于肺病病例众多,医生很难做出初步诊断,因此容易出现误诊。肺炎是易感肺病中的一种。细菌性肺炎患者的肺部状况可通过 X 光检查方式(即数字射线摄影术(DR))进行早期检测。然而,在实践中,Citra DR 的诊断过程需要很长时间,因为这需要有能力的医务人员(专家)。因此,需要一个能帮助医务人员加快肺病诊断过程并获得准确结果的系统,以避免误诊。本研究的目的是利用尖峰神经网络(SNN)方法对 DR 图像中的肺病进行分类。该系统使用 MATLAB 创建,第一步是创建一个读取数据程序,即读取从 Kaggle.com 获取的 .jpg 格式的 DR 图像二级数据。本研究使用的 DR 图像数据共计 200 张。接下来,将尺寸标准化为 50 x 50 像素。然后分割图像,将灰度直方图自动分为图像的两个不同部分,无需用户输入正常图像和肺炎图像的阈值。然后将图像转换为一维图像,并使用 50 张正常图像和 50 张肺炎图像创建一个用于训练数据的手动程序。最后,使用 100 张正常图像和 100 张肺炎图像创建一个数据测试程序。根据数据测试的结果,从 200 张图像中得出混淆矩阵,灵敏度为 87%,特异度为 69%,精确度为 73.7288%,召回率为 69%,准确率为 78%。
{"title":"Utilization of Spiking Neural Network (SNN) in X-Ray Image for Lung Disease Detection","authors":"Diah Rahayu Ningtias, Mohammad Rofi’i, B. A. Pramudita","doi":"10.31289/jite.v7i2.10671","DOIUrl":"https://doi.org/10.31289/jite.v7i2.10671","url":null,"abstract":"The large number of cases of lung disease means that doctors have difficulty in making initial diagnoses, making them prone to misdiagnoses. One type of lung disease that is included in the vulnerable category is pneumonia. Early detection of the condition of the lungs affected by bacterial pneumonia can be carried out by screening using the X-Ray examination modality, namely Digital Radiography (DR). However, in practice, the diagnosis process on Citra DR takes a long time because it requires competent medical personnel (specialists). A system is needed that can help medical personnel to speed up the process of diagnosing lung disease and get accurate results so that misdiagnosis does not occur. The aim of this research is to utilize the Spiking Neural Network (SNN) method for classifying lung disease from DR images. The system was created using MATLAB with the initial step of creating a read data program, namely reading DR image secondary data in .jpg format taken from Kaggle.com. This research uses DR image data totaling 200 images. Next, standardize the size to 50 x 50 pixels. Then segmenting the image divides the gray level histogram into two different parts of the image automatically without requiring user assistance to enter threshold values ​​for normal and pneumonia images. Then convert the image to 1 dimension and create a manual program for the training data using 50 normal images and 50 pneumonia images. Lastly, create a program to test the data using 100 normal images and 100 pneumonia images. Based on the results of data testing, a confusion matrix was obtained from 200 images with sensitivity of 87%, specificity of 69%, precision of 73.7288%, recall of 69%, and accuracy of 78%","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"424 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140472971","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Electronic Education Payment System Using Design Thinking Method At Mis Muhajirin 在 Mis Muhajirin 采用设计思维方法的电子教育支付系统
Pub Date : 2024-01-31 DOI: 10.31289/jite.v7i2.10845
Lala Pricilia Sahfitri, Muhammad Irwan Padli Nasution
Electronic Education Payment information system is an education fee payment system using online payment technology. However, the tuition payment system at MIS Muhajirin is still done manually by recording each payment transaction using the SPP card. This is an obstacle because it causes long queues by parents when paying tuition fees and there is also a high possibility of human error. This research aims to produce a web-based online payment information system at MIS Muhajirin, as well as to determine the level of efficiency if implemented at MIS Muhajirin. The method used in this research is the Design Thinking method which consists of 5 stages, namely Empathize, Define, Ideate, Prototype, and Test. The results of the research show that the information system developed provides effectiveness for admin staff when managing tuition payments at MIS Muhajirin and provides convenience for parents in terms of paying tuition online and not having to queue at school as before. Thus it can be concluded that this application is quite influential in improving the effectiveness and efficiency of the tuition payment system at MIS Muhajirin
电子教育缴费信息系统是一个使用在线支付技术的教育缴费系统。然而,MIS Muhajirin 学校的学费支付系统仍然是通过使用 SPP 卡记录每笔支付交易来手工完成的。这是一个障碍,因为这会导致家长在支付学费时排长队,而且还很有可能出现人为错误。本研究旨在为 MIS Muhajirin 制作一个基于网络的在线支付信息系统,并确定在 MIS Muhajirin 实施该系统后的效率水平。本研究采用的方法是设计思维法,包括五个阶段,即移情、定义、构思、原型和测试。研究结果表明,所开发的信息系统为 MIS Muhajirin 的行政人员管理学费支付提供了高效率,并为家长提供了方便,他们可以在线支付学费,而不必像以前那样在学校排队。因此,可以得出结论,该应用程序对提高 MIS Muhajirin 学费支付系统的有效性和效率具有相当大的影响。
{"title":"Electronic Education Payment System Using Design Thinking Method At Mis Muhajirin","authors":"Lala Pricilia Sahfitri, Muhammad Irwan Padli Nasution","doi":"10.31289/jite.v7i2.10845","DOIUrl":"https://doi.org/10.31289/jite.v7i2.10845","url":null,"abstract":"Electronic Education Payment information system is an education fee payment system using online payment technology. However, the tuition payment system at MIS Muhajirin is still done manually by recording each payment transaction using the SPP card. This is an obstacle because it causes long queues by parents when paying tuition fees and there is also a high possibility of human error. This research aims to produce a web-based online payment information system at MIS Muhajirin, as well as to determine the level of efficiency if implemented at MIS Muhajirin. The method used in this research is the Design Thinking method which consists of 5 stages, namely Empathize, Define, Ideate, Prototype, and Test. The results of the research show that the information system developed provides effectiveness for admin staff when managing tuition payments at MIS Muhajirin and provides convenience for parents in terms of paying tuition online and not having to queue at school as before. Thus it can be concluded that this application is quite influential in improving the effectiveness and efficiency of the tuition payment system at MIS Muhajirin","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"113 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140475405","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Analysis Of The Role Of Blockchain Technology In Recording Motor Vehicle Ownership Data 区块链技术在记录机动车所有权数据方面的作用分析
Pub Date : 2024-01-31 DOI: 10.31289/jite.v7i2.10938
Ahmad Imam Santoso, Muhammad Zarlis, H. Mawengkang
The importance of the role of motor vehicles in human life is revealed through its transformation from a tertiary need to a secondary one. In Indonesia, the number of motor vehicles reached 136.191 million units in 2020, prompting the government to regulate registration and identification through Presidential Regulation No. 5 of 2015. This research addresses issues related to motor vehicle administration in Indonesia, focusing on transparency, data integrity, and information availability. Inspired by the rapid growth in the number of motor vehicles and the increasing cases of theft, this research aims to design and implement an innovative motor vehicle ownership recording system using blockchain technology. This approach aims to enhance the accessibility of information on the origin and ownership of vehicles or Vehicle Registration Numbers (VRN), which is currently limited in both manual and online forms. The research methodology involves the design and implementation of blockchain technology, tested to verify its effectiveness in achieving transparency and data security goals. The research results indicate that this system can provide more comprehensive and distributed information to the general public, overcoming the limitations of centralized systems. The conclusion of this research affirms that the application of blockchain technology can be an innovative and effective solution to improve motor vehicle administration. The implications of this research include increased efficiency, security, and availability of information in handling vehicle administration, potentially having a positive impact on the general public and related industries
机动车从第三需求转变为第二需求,揭示了机动车在人类生活中的重要作用。在印度尼西亚,机动车数量在 2020 年达到 1.36191 亿辆,促使政府通过 2015 年第 5 号总统条例对登记和识别进行规范。本研究探讨了印尼机动车管理的相关问题,重点关注透明度、数据完整性和信息可用性。受机动车数量快速增长和盗窃案件日益增多的启发,本研究旨在利用区块链技术设计和实施创新的机动车所有权记录系统。这种方法旨在提高车辆来源和所有权信息或车辆登记号码(VRN)的可获取性,而目前的人工和在线形式都受到限制。研究方法包括设计和实施区块链技术,并通过测试验证其在实现透明度和数据安全目标方面的有效性。研究结果表明,该系统能为公众提供更全面的分布式信息,克服了中心化系统的局限性。这项研究的结论肯定了区块链技术的应用可以成为改善机动车管理的创新而有效的解决方案。这项研究的意义包括提高车辆管理的效率、安全性和信息可用性,从而对公众和相关行业产生积极影响。
{"title":"Analysis Of The Role Of Blockchain Technology In Recording Motor Vehicle Ownership Data","authors":"Ahmad Imam Santoso, Muhammad Zarlis, H. Mawengkang","doi":"10.31289/jite.v7i2.10938","DOIUrl":"https://doi.org/10.31289/jite.v7i2.10938","url":null,"abstract":"The importance of the role of motor vehicles in human life is revealed through its transformation from a tertiary need to a secondary one. In Indonesia, the number of motor vehicles reached 136.191 million units in 2020, prompting the government to regulate registration and identification through Presidential Regulation No. 5 of 2015. This research addresses issues related to motor vehicle administration in Indonesia, focusing on transparency, data integrity, and information availability. Inspired by the rapid growth in the number of motor vehicles and the increasing cases of theft, this research aims to design and implement an innovative motor vehicle ownership recording system using blockchain technology. This approach aims to enhance the accessibility of information on the origin and ownership of vehicles or Vehicle Registration Numbers (VRN), which is currently limited in both manual and online forms. The research methodology involves the design and implementation of blockchain technology, tested to verify its effectiveness in achieving transparency and data security goals. The research results indicate that this system can provide more comprehensive and distributed information to the general public, overcoming the limitations of centralized systems. The conclusion of this research affirms that the application of blockchain technology can be an innovative and effective solution to improve motor vehicle administration. The implications of this research include increased efficiency, security, and availability of information in handling vehicle administration, potentially having a positive impact on the general public and related industries","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"306 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140472384","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
期刊
JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING
全部 Acc. Chem. Res. ACS Applied Bio Materials ACS Appl. Electron. Mater. ACS Appl. Energy Mater. ACS Appl. Mater. Interfaces ACS Appl. Nano Mater. ACS Appl. Polym. Mater. ACS BIOMATER-SCI ENG ACS Catal. ACS Cent. Sci. ACS Chem. Biol. ACS Chemical Health & Safety ACS Chem. Neurosci. ACS Comb. Sci. ACS Earth Space Chem. ACS Energy Lett. ACS Infect. Dis. ACS Macro Lett. ACS Mater. Lett. ACS Med. Chem. Lett. ACS Nano ACS Omega ACS Photonics ACS Sens. ACS Sustainable Chem. Eng. ACS Synth. Biol. Anal. Chem. BIOCHEMISTRY-US Bioconjugate Chem. BIOMACROMOLECULES Chem. Res. Toxicol. Chem. Rev. Chem. Mater. CRYST GROWTH DES ENERG FUEL Environ. Sci. Technol. Environ. Sci. Technol. Lett. Eur. J. Inorg. Chem. IND ENG CHEM RES Inorg. Chem. J. Agric. Food. Chem. J. Chem. Eng. Data J. Chem. Educ. J. Chem. Inf. Model. J. Chem. Theory Comput. J. Med. Chem. J. Nat. Prod. J PROTEOME RES J. Am. Chem. Soc. LANGMUIR MACROMOLECULES Mol. Pharmaceutics Nano Lett. Org. Lett. ORG PROCESS RES DEV ORGANOMETALLICS J. Org. Chem. J. Phys. Chem. J. Phys. Chem. A J. Phys. Chem. B J. Phys. Chem. C J. Phys. Chem. Lett. Analyst Anal. Methods Biomater. Sci. Catal. Sci. Technol. Chem. Commun. Chem. Soc. Rev. CHEM EDUC RES PRACT CRYSTENGCOMM Dalton Trans. Energy Environ. Sci. ENVIRON SCI-NANO ENVIRON SCI-PROC IMP ENVIRON SCI-WAT RES Faraday Discuss. Food Funct. Green Chem. Inorg. Chem. Front. Integr. Biol. J. Anal. At. Spectrom. J. Mater. Chem. A J. Mater. Chem. B J. Mater. Chem. C Lab Chip Mater. Chem. Front. Mater. Horiz. MEDCHEMCOMM Metallomics Mol. Biosyst. Mol. Syst. Des. Eng. Nanoscale Nanoscale Horiz. Nat. Prod. Rep. New J. Chem. Org. Biomol. Chem. Org. Chem. Front. PHOTOCH PHOTOBIO SCI PCCP Polym. Chem.
﹀
mjeditor
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
Book学术官方微信
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1