Video conferencing services have gained significant popularity in recent years, enabling real-time communication and collaboration among individuals and groups. However, the performance of video conferencing systems over MANETs poses challenges of topology fluctuations and node density. This research paper aims to present an analysis of end-to-end delay and throughput in video conferencing over MANETs. The main objective is to identify the impact of node density in MANETs on video conferencing user experience. To conduct the study, an experimental setup of Zoom cloud meeting service was designed, consisting of a simulated MANET environment and a video conferencing application. End-to-end delay and throughput were measured via Wireshark software based on interconnected node scenarios and different configurations at densities of 2 and 4 nodes. The collected data was analyzed using appropriate statistical techniques to identify trends, patterns. The end-to-end delay analysis results revealed the impact of fluctuating network density conditions, on the overall delay experienced during the video conferencing session increased by 27%. While throughput analysis revealed a 65% decrease in data transfer capacity caused by higher packet loss factor in MANET. The integrated analysis explores the relationship between end-to-end delay and throughput, providing insight into optimization strategies. These findings can guide the design and implementation of more efficient and reliable video conferencing systems in mobile ad-hoc environments, In the face of fluctuations in node density, these findings can encourage the development of QoS mechanisms specifically designed for MANETs. These mechanisms can prioritize video packets and allocate network resources effectively, ensuring better user experience and overcoming resource constraints
{"title":"Analyzing Node Density Impact on End-to-End Delay and Throughput in Mobile Ad hoc Network Video Conferencing Services","authors":"R. Kango, N. Jamal, Ihsan","doi":"10.31289/jite.v7i2.9998","DOIUrl":"https://doi.org/10.31289/jite.v7i2.9998","url":null,"abstract":"Video conferencing services have gained significant popularity in recent years, enabling real-time communication and collaboration among individuals and groups. However, the performance of video conferencing systems over MANETs poses challenges of topology fluctuations and node density. This research paper aims to present an analysis of end-to-end delay and throughput in video conferencing over MANETs. The main objective is to identify the impact of node density in MANETs on video conferencing user experience. To conduct the study, an experimental setup of Zoom cloud meeting service was designed, consisting of a simulated MANET environment and a video conferencing application. End-to-end delay and throughput were measured via Wireshark software based on interconnected node scenarios and different configurations at densities of 2 and 4 nodes. The collected data was analyzed using appropriate statistical techniques to identify trends, patterns. The end-to-end delay analysis results revealed the impact of fluctuating network density conditions, on the overall delay experienced during the video conferencing session increased by 27%. While throughput analysis revealed a 65% decrease in data transfer capacity caused by higher packet loss factor in MANET. The integrated analysis explores the relationship between end-to-end delay and throughput, providing insight into optimization strategies. These findings can guide the design and implementation of more efficient and reliable video conferencing systems in mobile ad-hoc environments, In the face of fluctuations in node density, these findings can encourage the development of QoS mechanisms specifically designed for MANETs. These mechanisms can prioritize video packets and allocate network resources effectively, ensuring better user experience and overcoming resource constraints","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"63 47","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140486650","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-29DOI: 10.31289/jite.v7i2.10221
Nia Umilizah, Pipin Octavia, Lucky Indra Kesuma, Ira Rayani, Muhammad Suedarmin
Liver disease is a disease caused by various factors such as the spread of viruses. Liver damage causes the ability to break down red blood cells to be disrupted. Detection of liver disease can be done using the segmentation. Segmentation is useful for separating an area of the liver in an image from other areas. Segmentation carried out manually requires experts and a long time, so automatic segmentation is needed. CNN can be used to perform automatic segmentation. One of the CNN architectures is the U-Net architecture. Segmentation requires quality images to improve recognition of image patterns, so image improvement is needed in the form of contrast enhancement. Contrast improvement was carried out by taking Green Channel images. Contrast enhancement was carried out using the Contrast Stretching and CLAHE methods. The image improvement results show MSE and SSIM values 66.1844 and 0.7088. Evaluation of the image improvements obtained provides significant changes. The improved image is used at the segmentation stage. Segmentation is carried out using the U-Net architecture. The segmentation results obtained performance evaluation values in the form of accuracy 99.6%, sensitivity 98.9%, and specificity 99.7%. This shows that the proposed method can detect liver disease in liver images well
{"title":"Combination of Image Improvement on Segmentation Using a Convolutional Neural Network in Efforts to Detect Liver Disease","authors":"Nia Umilizah, Pipin Octavia, Lucky Indra Kesuma, Ira Rayani, Muhammad Suedarmin","doi":"10.31289/jite.v7i2.10221","DOIUrl":"https://doi.org/10.31289/jite.v7i2.10221","url":null,"abstract":"Liver disease is a disease caused by various factors such as the spread of viruses. Liver damage causes the ability to break down red blood cells to be disrupted. Detection of liver disease can be done using the segmentation. Segmentation is useful for separating an area of the liver in an image from other areas. Segmentation carried out manually requires experts and a long time, so automatic segmentation is needed. CNN can be used to perform automatic segmentation. One of the CNN architectures is the U-Net architecture. Segmentation requires quality images to improve recognition of image patterns, so image improvement is needed in the form of contrast enhancement. Contrast improvement was carried out by taking Green Channel images. Contrast enhancement was carried out using the Contrast Stretching and CLAHE methods. The image improvement results show MSE and SSIM values 66.1844 and 0.7088. Evaluation of the image improvements obtained provides significant changes. The improved image is used at the segmentation stage. Segmentation is carried out using the U-Net architecture. The segmentation results obtained performance evaluation values in the form of accuracy 99.6%, sensitivity 98.9%, and specificity 99.7%. This shows that the proposed method can detect liver disease in liver images well","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"34 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140489731","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In preparing for the COVID-19 endemic period, every government and private agency will be required to comply with new rules by the government, where everyone is required to wear a mask and perform physical distancing when leaving the house for activities. This is one of the new habits that will be familiarized to the public by the government in 2022 and the following year. Due to the easy transmission of the Covid-19 virus, the selection of SNI masks is highly recommended. The purpose of this study was to classify the types of SNI and non-SNI masks so that the presence of this SNI mask cluster monitoring system could increase security in locations that require the mandatory use of masks such as in schools and the masks used can function effectively to prevent the spread and transmission of Covid -19.. From the dataset, 100 pictures were taken randomly on SNI and non-SNI mask users. Where the types of masks that are SNI have been studied on Duckbil masks, KN-45, Surgical Mask 2 ply, and Surgical 3 ply are included in SNI masks and cloth masks are not included in SNI masks at a distance of 0.5 meters, 1 meter, 1.5 meters and 2 meters from the mobile device. It can be seen on the SNI mask at a distance of 0.5 meters achieving 100% accuracy, a distance of 1 meter achieving 100% accuracy, at a distance of 1.5 meters achieving an accuracy of 95% and at a distance of 2 meters achieving 90% accuracy. Whereas non-SNI masks at a distance of 0.5 meters achieve 100% accuracy, a distance of 1 meter achieves 100% accuracy, at a distance of 1.5 meters achieves an accuracy of 95% and at a distance of 2 meters achieves an accuracy of 90%.
{"title":"Optimization of Faster R-CNN to Detect SNI Masks at Mandatory Mask Doors","authors":"M. D. Nasution, A. Al-Khowarizmi, H. Maulana","doi":"10.31289/jite.v6i2.8128","DOIUrl":"https://doi.org/10.31289/jite.v6i2.8128","url":null,"abstract":"In preparing for the COVID-19 endemic period, every government and private agency will be required to comply with new rules by the government, where everyone is required to wear a mask and perform physical distancing when leaving the house for activities. This is one of the new habits that will be familiarized to the public by the government in 2022 and the following year. Due to the easy transmission of the Covid-19 virus, the selection of SNI masks is highly recommended. The purpose of this study was to classify the types of SNI and non-SNI masks so that the presence of this SNI mask cluster monitoring system could increase security in locations that require the mandatory use of masks such as in schools and the masks used can function effectively to prevent the spread and transmission of Covid -19.. From the dataset, 100 pictures were taken randomly on SNI and non-SNI mask users. Where the types of masks that are SNI have been studied on Duckbil masks, KN-45, Surgical Mask 2 ply, and Surgical 3 ply are included in SNI masks and cloth masks are not included in SNI masks at a distance of 0.5 meters, 1 meter, 1.5 meters and 2 meters from the mobile device. It can be seen on the SNI mask at a distance of 0.5 meters achieving 100% accuracy, a distance of 1 meter achieving 100% accuracy, at a distance of 1.5 meters achieving an accuracy of 95% and at a distance of 2 meters achieving 90% accuracy. Whereas non-SNI masks at a distance of 0.5 meters achieve 100% accuracy, a distance of 1 meter achieves 100% accuracy, at a distance of 1.5 meters achieves an accuracy of 95% and at a distance of 2 meters achieves an accuracy of 90%.","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125337060","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
SMA Negeri 2 Palembang has two majors, science and social studies. As a result of choosing the wrong major after entering college, students sometimes experience difficulties and feel the wrong major, in connection with this problem the author tries to provide a solution for determining majors for college using the k-means clustering method. In this study, the students were grouped using the data mining method. The group is based on the attributes of majors, interests, traits, hobbies, talents, and the average value of science and social science subjects. Clustering data using the K-Means method and measuring the Euclidean distance, analyzed using Microsoft excel manual calculations and RapidMiner tools. The results of the study indicate that Cluster 1 is a cluster that is recommended to take the Language major. Cluster 2 is a cluster that is recommended for a major in Engineering. Cluster 3 is a cluster that is recommended to major in Health/Medicine. Cluster 4 is a cluster that is recommended for majoring in Economics. Cluster 5 is the recommended cluster for majoring in Language. While the results of the calculation research using RapidMiner, Cluster_0 is recommended to major in Engineering, Cluster_1 is recommended to major in Economics, Cluster_2 is recommended to major in Language, Cluster_3 is recommended to major in Education, Cluster_4 is recommended to major in Medicine/Health.
SMA Negeri 2巨港有两个专业,科学和社会研究。由于进入大学后选择了错误的专业,学生有时会遇到困难,感觉自己选择了错误的专业,针对这一问题,作者试图使用k-means聚类方法为大学选择专业提供解决方案。在本研究中,使用数据挖掘方法对学生进行分组。这个群体是根据专业属性、兴趣、性格、爱好、才能以及理科和社科学科的平均分来划分的。使用K-Means方法聚类数据并测量欧几里得距离,使用Microsoft excel手动计算和RapidMiner工具进行分析。研究结果表明,集群1是推荐选择语言专业的集群。集群2是一个推荐给工程专业的集群。集群3是一个集群,推荐专业为卫生/医学。集群4是经济学专业推荐的集群。群集5是语言专业推荐的群集。在RapidMiner计算研究结果中,Cluster_0推荐工程专业,Cluster_1推荐经济专业,Cluster_2推荐语言专业,Cluster_3推荐教育专业,Cluster_4推荐医学/卫生专业。
{"title":"Data Clustering Recommendations For Selection Student Majors To Higher Edication Using The K-Means Method (Case Study of SMAN 2 Palembang)","authors":"J. Jemakmun, R. A. Dicky Syarief Purboyo","doi":"10.31289/jite.v6i2.7911","DOIUrl":"https://doi.org/10.31289/jite.v6i2.7911","url":null,"abstract":"SMA Negeri 2 Palembang has two majors, science and social studies. As a result of choosing the wrong major after entering college, students sometimes experience difficulties and feel the wrong major, in connection with this problem the author tries to provide a solution for determining majors for college using the k-means clustering method. In this study, the students were grouped using the data mining method. The group is based on the attributes of majors, interests, traits, hobbies, talents, and the average value of science and social science subjects. Clustering data using the K-Means method and measuring the Euclidean distance, analyzed using Microsoft excel manual calculations and RapidMiner tools. The results of the study indicate that Cluster 1 is a cluster that is recommended to take the Language major. Cluster 2 is a cluster that is recommended for a major in Engineering. Cluster 3 is a cluster that is recommended to major in Health/Medicine. Cluster 4 is a cluster that is recommended for majoring in Economics. Cluster 5 is the recommended cluster for majoring in Language. While the results of the calculation research using RapidMiner, Cluster_0 is recommended to major in Engineering, Cluster_1 is recommended to major in Economics, Cluster_2 is recommended to major in Language, Cluster_3 is recommended to major in Education, Cluster_4 is recommended to major in Medicine/Health.","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116548980","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Elsa Sabrina, Muhammad Anwar, Hansi Effendi, Resmi Darni
The high unemployment rate is a challenge for the world of education because not all graduates succeed in entering the world of work. Higher education is one of the largest contributors to unemployment in Indonesia. Likewise with the objectives of vocational education which are expected to be able to immediately work and create jobs. The problem is that not all majors are according to personality type. Therefore, researchers will develop a system aimed at recommending majors in higher education based on personality types. The method used is the Research and Development (R&D) method using the Four D (4 D) model a. Defining stage (Define); b) Design Stage (Design); c) Development Stage (Develop); d) Stage of Spread (Disseminate). This research was only carried out to the extent of development and resulted in a valid system to be implemented based on the validator's assessment. The data collection instrument consisted of product and linguistic expert validation sheets. This study shows that the validation results have an average percentage of 92.5% with a valid category. Based on the results of the research and discussion, it can be concluded that the system is valid to be used as a reference in selecting majors
{"title":"Development of Engineering Vocational Choice Systems in Higher Education","authors":"Elsa Sabrina, Muhammad Anwar, Hansi Effendi, Resmi Darni","doi":"10.31289/jite.v6i2.8830","DOIUrl":"https://doi.org/10.31289/jite.v6i2.8830","url":null,"abstract":"The high unemployment rate is a challenge for the world of education because not all graduates succeed in entering the world of work. Higher education is one of the largest contributors to unemployment in Indonesia. Likewise with the objectives of vocational education which are expected to be able to immediately work and create jobs. The problem is that not all majors are according to personality type. Therefore, researchers will develop a system aimed at recommending majors in higher education based on personality types. The method used is the Research and Development (R&D) method using the Four D (4 D) model a. Defining stage (Define); b) Design Stage (Design); c) Development Stage (Develop); d) Stage of Spread (Disseminate). This research was only carried out to the extent of development and resulted in a valid system to be implemented based on the validator's assessment. The data collection instrument consisted of product and linguistic expert validation sheets. This study shows that the validation results have an average percentage of 92.5% with a valid category. Based on the results of the research and discussion, it can be concluded that the system is valid to be used as a reference in selecting majors","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"82 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122934321","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Various studies have been carried out to classify English accents using traditional classifiers and modern classifiers. In general, research on voice classification and voice recognition that has been done previously uses the MFCC method as voice feature extraction. The stages in this study began with importing datasets, data preprocessing of datasets, then performing MFCC feature extraction, conducting model training, testing model accuracy and displaying a confusion matrix on model accuracy. After that, an analysis of the classification has been carried out. The overall results of the 10 tests on the test set show the highest accuracy value for feature 17 value of 64.96% in the test results obtained some important information, including; The test results on the MFCC coefficient values of twelve to twenty show overfitting. This is shown in the model training process which repeatedly produces high accuracy but produces low accuracy in the classification testing process. The feature assignment on MFCC shows that the higher the feature value assignment on MFCC causes a very large sound feature dimension. With the large number of features obtained, the MFCC method has a weakness in determining the number of features.
{"title":"Analysis Of Variation In The Number Of MFCC Features In Contrast To LSTM In The Classification Of English Accent Sounds","authors":"Afriandy Sharif, O. S. Sitompul, E. Nababan","doi":"10.31289/jite.v6i2.8566","DOIUrl":"https://doi.org/10.31289/jite.v6i2.8566","url":null,"abstract":"Various studies have been carried out to classify English accents using traditional classifiers and modern classifiers. In general, research on voice classification and voice recognition that has been done previously uses the MFCC method as voice feature extraction. The stages in this study began with importing datasets, data preprocessing of datasets, then performing MFCC feature extraction, conducting model training, testing model accuracy and displaying a confusion matrix on model accuracy. After that, an analysis of the classification has been carried out. The overall results of the 10 tests on the test set show the highest accuracy value for feature 17 value of 64.96% in the test results obtained some important information, including; The test results on the MFCC coefficient values of twelve to twenty show overfitting. This is shown in the model training process which repeatedly produces high accuracy but produces low accuracy in the classification testing process. The feature assignment on MFCC shows that the higher the feature value assignment on MFCC causes a very large sound feature dimension. With the large number of features obtained, the MFCC method has a weakness in determining the number of features.","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"119 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116603131","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ade Sukmawati, Lemi Iryana, Pandi Adriansyah, Lucky Indra Kesuma
Floods are one of the natural events that often occur, especially in areas that have a large population. Palembang is one of the cities in Sumatra Province which often experiences flooding due to its dense population and lack of infiltration areas. One way to improve flood preparedness is to identify floods by using fuzzy logic. This study aims to identify floods in the Palembang area using fuzzy logic mamdani and Sugeno methods. Flood identification is carried out in 6 stages, namely variable determination, fuzzification, inference, application of fuzzy rules, defuzzification, and evaluation. The variables used in this study are rainfall, temperature, area elevation, and the results of flood identification that have a value of flood or not flood. The results of flood identification using the Mamdani method achieved an accuracy of 82% while the Sugeno method achieved an accuracy of 91%. The results of this study indicate that the mamdani and Sugeno fuzzy logic methods are quite good in identifying floods so that they can improve flood preparedness attitudes.
{"title":"Identification of Floods in Palembang Area Using Fuzzy Logic Method of Mamdani and Sugeno","authors":"Ade Sukmawati, Lemi Iryana, Pandi Adriansyah, Lucky Indra Kesuma","doi":"10.31289/jite.v6i2.8146","DOIUrl":"https://doi.org/10.31289/jite.v6i2.8146","url":null,"abstract":"Floods are one of the natural events that often occur, especially in areas that have a large population. Palembang is one of the cities in Sumatra Province which often experiences flooding due to its dense population and lack of infiltration areas. One way to improve flood preparedness is to identify floods by using fuzzy logic. This study aims to identify floods in the Palembang area using fuzzy logic mamdani and Sugeno methods. Flood identification is carried out in 6 stages, namely variable determination, fuzzification, inference, application of fuzzy rules, defuzzification, and evaluation. The variables used in this study are rainfall, temperature, area elevation, and the results of flood identification that have a value of flood or not flood. The results of flood identification using the Mamdani method achieved an accuracy of 82% while the Sugeno method achieved an accuracy of 91%. The results of this study indicate that the mamdani and Sugeno fuzzy logic methods are quite good in identifying floods so that they can improve flood preparedness attitudes.","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"70 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131695370","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Metro ethernet is a data communication network owned by PT. Telkom Indonesia (Persero) through distribution channels, one of which is Open Shortest Path First (OSPF). As technology develops, IPv4 is used as the core addressing protocol for every communicating network device and has the responsibility of finding the route taken by packets to reach their destination. The problem that occurs in the data communication network is the absence of stable connectivity when there are links between cities experiencing downtime, resulting in several link congestion on the data packet path. To overcome the above problems, this study analyzed IPv4-based metro ethernet networks through the OSPF routing protocol using Graphical Network Simulator-3 (GNS-3). This study implements a failover system as a backup link in the event of a Jakarta-Bogor downlink. Based on the simulation and test results, the failover link shows a success status and functions to minimize network connection breakdowns. This is because the use of OSPF routing isOSPF routing canen the main link is down, so the path will be diverted via the backup link. QoS measurements using a single link obtained an average throughput of 195 Kbps, while dual links obtained an average throughput of 258 Kbps. This is because the distance from the source to the destination router is passed by more single links than dual links. Overall, the measurement shows that having a backup link can increase the stability of the data communication network connection when it is down and tested according to ETSI standards
城域以太网是PT. Telkom Indonesia (Persero)通过分销渠道拥有的数据通信网络,其中一种是开放最短路径优先(OSPF)。随着技术的发展,IPv4被用作每个通信网络设备的核心寻址协议,并负责查找数据包到达目的地所经过的路由。数据通信网络中出现的问题是,当城市之间的链路出现停机时,缺乏稳定的连接,导致数据包路径上的多个链路拥塞。为了克服上述问题,本研究使用图形网络模拟器-3 (GNS-3)对基于ipv4的城域以太网通过OSPF路由协议进行了分析。本研究实现了一个故障转移系统,作为雅加达-茂物下行链路事件的备份链路。仿真和测试结果表明,故障切换链路处于成功状态,能够最大限度地减少网络连接故障。这是因为使用OSPF路由可以使主链路断开,所以路径会通过备份链路转移。使用单链路的QoS测量获得了195 Kbps的平均吞吐量,而双链路获得了258 Kbps的平均吞吐量。这是因为从源路由器到目的路由器的距离是通过单链路而不是双链路来传递的。总的来说,根据ETSI标准测试表明,当数据通信网络连接中断时,备份链路可以增加数据通信网络连接的稳定性
{"title":"Implementation of Link Failover on Metronet Network PT. Telkom Indonesia (Persero) Based on Ipv4 and OSPF","authors":"Yosy Rahmawati, Nabila Mutiara Anjani","doi":"10.31289/jite.v6i2.8313","DOIUrl":"https://doi.org/10.31289/jite.v6i2.8313","url":null,"abstract":"Metro ethernet is a data communication network owned by PT. Telkom Indonesia (Persero) through distribution channels, one of which is Open Shortest Path First (OSPF). As technology develops, IPv4 is used as the core addressing protocol for every communicating network device and has the responsibility of finding the route taken by packets to reach their destination. The problem that occurs in the data communication network is the absence of stable connectivity when there are links between cities experiencing downtime, resulting in several link congestion on the data packet path. To overcome the above problems, this study analyzed IPv4-based metro ethernet networks through the OSPF routing protocol using Graphical Network Simulator-3 (GNS-3). This study implements a failover system as a backup link in the event of a Jakarta-Bogor downlink. Based on the simulation and test results, the failover link shows a success status and functions to minimize network connection breakdowns. This is because the use of OSPF routing isOSPF routing canen the main link is down, so the path will be diverted via the backup link. QoS measurements using a single link obtained an average throughput of 195 Kbps, while dual links obtained an average throughput of 258 Kbps. This is because the distance from the source to the destination router is passed by more single links than dual links. Overall, the measurement shows that having a backup link can increase the stability of the data communication network connection when it is down and tested according to ETSI standards","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"541 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116710494","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
I. Simanjuntak, Sulistyaningsih Sulistyaningsih, Ketty Siti Salamah, Krisna Yudha Dewantara
The satellite communication system that is used for ship communication in Indonesian waters is expected to transmit real time data at any time under any conditions. However, currently, the Vsat Gyrsoscope antenna that is installed on the Pelni ship still uses the Ku band frequency. This frequency band is very susceptible to rain attenuation. Vsat Gyro will automatically search for satellites that cover it. Only when it is raining and the ship is moving towards the port, is there a decrease in the receiving power level. SNR and power and C/N will drop. Therefore, it is necessary to do an analysis to overcome this problem so that it is not disconnected during the transmission. This study conducted an analytical study to validate the analytical predictions of phasing the vsat power signal level on the pelni ship to maintain communication during sea operations, which are included in TKT 3 (three). The tools used in the measurement are vsat modem, PRTG application, laptop, RJ 45 cable, and Spectrum Analyzer. By optimizing the calculation of the margin link budget, the calculation of Qos and the parameters vsat Eb/No, C/N and SNR when adjusted to the operating conditions of the ship with high rain intensity so that communication can continue to run even when the worst conditions can be maintained properly.Â
{"title":"Analysis of Vsat Gyro performance based on the power level of the antenna receiver on the Pelni ship","authors":"I. Simanjuntak, Sulistyaningsih Sulistyaningsih, Ketty Siti Salamah, Krisna Yudha Dewantara","doi":"10.31289/jite.v6i2.7535","DOIUrl":"https://doi.org/10.31289/jite.v6i2.7535","url":null,"abstract":"The satellite communication system that is used for ship communication in Indonesian waters is expected to transmit real time data at any time under any conditions. However, currently, the Vsat Gyrsoscope antenna that is installed on the Pelni ship still uses the Ku band frequency. This frequency band is very susceptible to rain attenuation. Vsat Gyro will automatically search for satellites that cover it. Only when it is raining and the ship is moving towards the port, is there a decrease in the receiving power level. SNR and power and C/N will drop. Therefore, it is necessary to do an analysis to overcome this problem so that it is not disconnected during the transmission. This study conducted an analytical study to validate the analytical predictions of phasing the vsat power signal level on the pelni ship to maintain communication during sea operations, which are included in TKT 3 (three). The tools used in the measurement are vsat modem, PRTG application, laptop, RJ 45 cable, and Spectrum Analyzer. By optimizing the calculation of the margin link budget, the calculation of Qos and the parameters vsat Eb/No, C/N and SNR when adjusted to the operating conditions of the ship with high rain intensity so that communication can continue to run even when the worst conditions can be maintained properly. ","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"45 4","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114031991","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Faza, Meyatul Husna, Ajulio Padly Sembiring, Rina Anugrahwaty, Silmi, Romi Fadillah Rahmat, Rhama Permadi Ahmad
Mangrove plants are one of the plants that really help aquatic ecosystems between the sea, coast, and land. Mangrove plants provide many ecological, social, and economic benefits. In Indonesia, mangrove plants have 202 species with the same anatomy as other plants in general, consisting of roots, fruits, stems and leaves. Nowadays, the location of mangrove plants in Indonesia has experienced the fastest damage in the world due to conversion to ponds, settlements, industry and plantations. One of the efforts to restore aesthetic value and restore the ecological function of mangrove forest areas is rehabilitation using mangrove fruit. In the rehabilitation process, farmers generally use the manual method with the naked eye to determine fruit ripeness on mangrove plants, so the resulting level of accuracy is not optimal. To overcome this problem, an application is needed that can facilitate farmers in determining fruit maturity in mangrove plants so that it can help determine the maturity level of mangrove fruit. The development of this application utilizes the Deep Learning method as well as the utilization of digital image processing techniques with Grayscaling, Adaptive Threshold, Sharpening and Smoothing techniques. The results of this study are an application that can detect the level of fruit maturity in mangrove plants with an accuracy of 99.11%. With this application, determining the maturity level of fruit on mangrove plants can be easily done.
{"title":"Applications For Detecting The Rate Of Fruit In Mangrove Plants","authors":"S. Faza, Meyatul Husna, Ajulio Padly Sembiring, Rina Anugrahwaty, Silmi, Romi Fadillah Rahmat, Rhama Permadi Ahmad","doi":"10.31289/jite.v6i2.8379","DOIUrl":"https://doi.org/10.31289/jite.v6i2.8379","url":null,"abstract":"Mangrove plants are one of the plants that really help aquatic ecosystems between the sea, coast, and land. Mangrove plants provide many ecological, social, and economic benefits. In Indonesia, mangrove plants have 202 species with the same anatomy as other plants in general, consisting of roots, fruits, stems and leaves. Nowadays, the location of mangrove plants in Indonesia has experienced the fastest damage in the world due to conversion to ponds, settlements, industry and plantations. One of the efforts to restore aesthetic value and restore the ecological function of mangrove forest areas is rehabilitation using mangrove fruit. In the rehabilitation process, farmers generally use the manual method with the naked eye to determine fruit ripeness on mangrove plants, so the resulting level of accuracy is not optimal. To overcome this problem, an application is needed that can facilitate farmers in determining fruit maturity in mangrove plants so that it can help determine the maturity level of mangrove fruit. The development of this application utilizes the Deep Learning method as well as the utilization of digital image processing techniques with Grayscaling, Adaptive Threshold, Sharpening and Smoothing techniques. The results of this study are an application that can detect the level of fruit maturity in mangrove plants with an accuracy of 99.11%. With this application, determining the maturity level of fruit on mangrove plants can be easily done.","PeriodicalId":123764,"journal":{"name":"JOURNAL OF INFORMATICS AND TELECOMMUNICATION ENGINEERING","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131754337","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}